On 11/05/2011 18:54, intersolar-direct wrote:
We use Fedora rootfs from Genesi Smartbook. But we have little problem - FSTAB seeking rootfs in different place - mmcblk1p2 Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ?
If the bootstrap is anything like what it was before, I'm guessing you forgot to change it in the initrd. The rootfs locations are hard-coded. While you're at it, you may want to make the initrd mount the rootfs read-only so it can be fscked by rc.sysinit. :)
- Two testing - new rootFS from this
http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint) If we use new rootfs from this - http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011-05... from 11-May-2011 10:52 116M - all working, but only comand prompt (NO GUI).
Just out of interest - do the recent nvidia drivers work properly on the AC100 now, with decent, usable acceleration for things like video playback?
Its requered this comand (for working wireless internet): apt-get install wpasupplicant apt-get install aptitude modprobe rt2800usb wpa_passphrase ssid password > /etc/wpa_supplicant/ssid.conf wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext after that (download & start GNOME) apt-get install gnome apt-get install xorg
Hmm... Don't we use yum on Fedora?
Gordan
Hmm, I've had a look around on the link you provided but I can't find the kernel sources anywhere. Can you post a link to the sources and/or patches that make it work on the AC100?
Gordan
On 05/11/2011 06:54 PM, intersolar-direct wrote:
Sorry for delay. We have new, stable kernel 2.6.37.6 Input devices works correctly, work Wireless & 3G & more stuff. Its build w/o sound & uncorrectly sleep (suspend). About Fedora on Toshiba AC100. We have launch new kernel 2.6.37 w. Fedora ARM13 This guide for install Fedora ARM on Toshiba AC100 2.6.37 http://www.pole.su/Toshiba-AC100-Fedora-2.6.37-install-ENG.htm if we change one string, we install Fedora onToshiba AC100 well: This string: wget http://ac100.gudinna.com/tegra-rootfs.tgz tar xvf tegra-rootfs.tgz --numeric-owner -C /mnt/mmc tar xvf tegra-rootfs.tgz - numeric-owner-C / mnt / mmc need change to: wget http://ausil.us/smartbook/smartbook-rootfs-f13.tar.bz2 tar xvf smartbook-rootfs-f13.tar.bz2 --numeric-owner -C /mnt/mmc tar xvf smartbook-rootfs-f13.tar.bz2 - numeric-owner-C / mnt / mmc We use Fedora rootfs from Genesi Smartbook. But we have little problem - FSTAB seeking rootfs in different place - mmcblk1p2 Where need to change for FSTAB seeking rootfs in right place - mmcblk0p1 ? 2. Two testing - new rootFS from this http://fedoraproject.org/wiki/Architectures/ARM/F13-ARM-Beta2 (little hint) If we use new rootfs from this - http://scotland.proximity.on.ca/fedora-arm/beta/f13/rootfs-f13-beta3-2011-05... from 11-May-2011 10:52 116M - all working, but only comand prompt (NO GUI). Its requered this comand (for working wireless internet): apt-get install wpasupplicant apt-get install aptitude modprobe rt2800usb wpa_passphrase ssid password > /etc/wpa_supplicant/ssid.conf wpa_supplicant -c /etc/wpa_supplicant/ssid.conf -i wlan0 -D wext after that (download & start GNOME) apt-get install gnome apt-get install xorg
startx
Good luck
arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
-
Gordan Bobic -
intersolar-direct