Has anyone stumbled upon uaputl failing to bss_start? Everything else works as it seems.
[root@fedora-arm home]# uaputl sys_cfg_radio_ctl 0 Radio setting successful [root@fedora-arm home]# uaputl sys_cfg_channel 5 Channel setting successful [root@fedora-arm home]# uaputl sys_cfg_ssid "dummyssid" SSID setting successful [root@fedora-arm home]# uaputl sys_cfg_protocol 32 protocol setting successful [root@fedora-arm home]# uaputl sys_cfg_cipher 8 8 cipher setting successful [root@fedora-arm home]# uaputl sys_cfg_wpa_passphrase "dummypasswd" WPA passphrase setting successful [root@fedora-arm home]# uaputl bss_start ERR:UAP_BSS_CTRL fail, result=0 ERR:Could not start BSS!
ifconfig uap0 Link encap:Ethernet HWaddr 00:24:23:1F:B1:7B UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Some uaputl <option> give ERR: not supported "blah".
any ideas?
Note: I compiled a patched kernel (based on vanilla 2.6.34.1) with full support for libertas_uap, kopied the mrvl firmware folder from the debian rootfs over to my SDHC card, copied uaputl from the debian rootfs, did modules_install firmware_install header_install and blacklisted libertas and libertas_sdio to prevent them hogging the hardware before libertas_uap comes onto the playfield.
Help is very much appreaciate. If required I can "send"(torrent or alike) the full image (~15GiB), the KernelBuild env, uImage and modules.
Thanks for any help or tipps
Regards
Bernhard
Anyone any idea? Any ideas hints, whatever.. I just do not know where to search start searching beyond google which only spits my last mail within the mail archieve at me...
Regards
Bernhard
fre 2010-08-13 klockan 23:24 +0200 skrev Bernhard Schuster:
Anyone any idea? Any ideas hints, whatever.. I just do not know where to search start searching beyond google which only spits my last mail within the mail archieve at me...
No ideas here other than to try another kernel. But not a Guruplug user..
Regards Henrik
Post your dmesg, lsmod output, kernel config and run uaputl under strace so we can see what is going on underneath the hood...
# strace uaputl bss_start
And also post the output of uaputl running under strace with arguments that will cause the "ERR: not supported" failure.
On Fri, Aug 13, 2010 at 2:24 PM, Bernhard Schuster schuster.bernhard@googlemail.com wrote:
Anyone any idea? Any ideas hints, whatever.. I just do not know where to search start searching beyond google which only spits my last mail within the mail archieve at me... Regards Bernhard _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm
2010/8/15 Jon Hermansen jon.hermansen@gmail.com
Post your dmesg, lsmod output, kernel config and run uaputl under strace so we can see what is going on underneath the hood...
# strace uaputl bss_start
And also post the output of uaputl running under strace with arguments that will cause the "ERR: not supported" failure.
Since I updated the kernel from 2.6. 33-blah to my custom I do not get any ERR not supported failure, but some commands simply do not come to an end but wait for ioctl.
Attach: Requested data.
Regards Bernhard
Other question, did any one else ever try toget wlan workin on GuruPlug Server? Successß fail?
Regards
Bernhard
-
Bernhard Schuster -
Henrik Nordström -
Jon Hermansen