libteam May 2012

libteam@lists.fedorahosted.org

2 participants
2 discussions

Re: [libteam]teamd_init() failed
by Flavio Leitner 31 May '12

31 May '12

On Thu, 31 May 2012 23:23:42 +0800 Wenhua Zhang <shiziwen(a)gmail.com> wrote: > Hi Flavio, > Thanks for your help. > I have build the latest net-next kernel and try again. > There is still some problem, and I will try some other method to fix it. > I did those steps yesterday using net-next and I am now running active-backup on two different machines. I had to clean the 'configure' caches from libnl and libteam as well in order to get updated binaries. fbl > > > 2012/5/31 Flavio Leitner <fbl(a)redhat.com>: > > On Thu, 31 May 2012 11:36:43 +0800 > > Wenhua Zhang <shiziwen(a)gmail.com> wrote: > > > >> Hi all, > >> When I try to test the libteam as Example in > >> https://fedorahosted.org/libteam/wiki/InfrastructureSpecification, I > >> got errors as blew: > >> Failed to create team device. > >> teamd_init() failed. > >> Failed to start daemon: Operation not supported > >> > >> The command is :teamd -f teamd2.conf -D > >> The conf is : > >> { > >> "device": "team0", > >> "runner": { > >> "name": "lacp", > >> "active": 1, > >> "fast_rate": 1 > >> }, > >> "link_watch": {"name": "ethtool"}, > >> "ports": {"eth1": {}, "eth2": {}} > >> } > >> > >> So, is there something wrong with my commands or conf file? > >> Thanks for your help. > > > > You didn't tell what kernel you are using. You need to have > > a kernel with libteam driver enabled. > > > > After booting with that kernel, compile libnl, install it. > > Next compile libteam and install it. > > > > That fixed the same issue here. > > fbl > >

1 0

[libteam]teamd_init() failed
by Wenhua Zhang 31 May '12

31 May '12

Hi all, When I try to test the libteam as Example in https://fedorahosted.org/libteam/wiki/InfrastructureSpecification, I got errors as blew: Failed to create team device. teamd_init() failed. Failed to start daemon: Operation not supported The command is :teamd -f teamd2.conf -D The conf is : { "device": "team0", "runner": { "name": "lacp", "active": 1, "fast_rate": 1 }, "link_watch": {"name": "ethtool"}, "ports": {"eth1": {}, "eth2": {}} } So, is there something wrong with my commands or conf file? Thanks for your help.

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

libteam May 2012