libteam May 2014

libteam@lists.fedorahosted.org

6 participants
8 discussions

Adding ports to an LACP group after the daemon started
by David Shwatrz 31 May '14

31 May '14

Hello, I created an LACP group by preparing a config file; I put two entries for two ports, eth0 and eth1, in that config file (lacp.conf) and I ran the teamd daemon successfully with this configuration by: teamd -f lacp.conf Now I want to add additional interfaces to this LACP group, like eth2 and eth3, setting values for port members, like lacp_key. If I try: teamdctl team0 port add eth2 lacp_key=56 I get an error (Unknown command). I know, of course, that I can add this entry for eth3 in the lacp.conf file and restart the daemon. But the question is: After the daemon is started, setting an LACP group, how can I add ports to it such that various port members (like lacp_key or priority) can be set ? (without restarting the daemon) regards, DavidS

2 1

[jpirko/libteam] aa94ed: teamd: allow restart on failure through systemd
by GitHub 31 May '14

31 May '14

Branch: refs/heads/master Home: https://github.com/jpirko/libteam Commit: aa94ed4838c59e708587b2b9b23959cff60a42c6 https://github.com/jpirko/libteam/commit/aa94ed4838c59e708587b2b9b23959cff6… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-30 (Fri, 30 May 2014) Changed paths: M teamd/redhat/systemd/teamd@.service Log Message: ----------- teamd: allow restart on failure through systemd Signed-off-by: Jiri Pirko <jiri(a)resnulli.us>

1 0

[jpirko/libteam] 058612: teamd: distinguish exit code between init error an...
by GitHub 30 May '14

30 May '14

Branch: refs/heads/master Home: https://github.com/jpirko/libteam Commit: 058612734e9ef241ea1835aee5d85ada1d13b5e3 https://github.com/jpirko/libteam/commit/058612734e9ef241ea1835aee5d85ada1d… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-30 (Fri, 30 May 2014) Changed paths: M teamd/teamd.c Log Message: ----------- teamd: distinguish exit code between init error and runtime error Signed-off-by: Jiri Pirko <jiri(a)resnulli.us>

1 0

Establishing a Link Aggregation with libteamd
by Andy Johnson 30 May '14

30 May '14

Hello, libteam. When trying to establish a link aggregation with libteam, against an A/D switch (which is configured to support LACP), is there a way to know what is the status of the LACP session by some userspace tool (apart from a sniffer), or by any logs ? Thanks, Andy

2 3

Changing the LACP (newbie)
by David Shwatrz 28 May '14

28 May '14

Hi, I run the teamd daemon by "teamd -d". Then I run: #teamdctl team0 port add p4p1 and then: #teamdctl team0 config dump And I get: { "device": "team0", "ports": { "p4p1": { "link_watch": { "name": "ethtool" } } }, "runner": { "name": "roundrobin" } } Now, I want to change the "runner" to be LACP. How can it be done ? is there more than on way to achieve it ? regards, D. Shwartz

2 1

problematic sequence
by Kevin Wilson 24 May '14

24 May '14

Hi, It seems to me that the following sequence is a bit problematic; I am running it on fedora 20: modprobe team teamd -d then kill -9 <teamdPid> (teamdPid is of course the daemon pid) and then: rmmod team gives rmmod: ERROR: Module team is in use by: team_mode_roundrobin but also: rmmod: ERROR: Module team_mode_roundrobin is in use Any ideas ? it seems to me that this is something which should not happen. Or am I missing something ? regards, Kevin

3 3

[jpirko/libteam] a3a552: teamd: add "debug_level" config option
by GitHub 13 May '14

13 May '14

Branch: refs/heads/master Home: https://github.com/jpirko/libteam Commit: a3a552b3e834223449bfdce41d773bae7ed5e429 https://github.com/jpirko/libteam/commit/a3a552b3e834223449bfdce41d773bae7e… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-13 (Tue, 13 May 2014) Changed paths: M man/teamd.conf.5 M teamd/teamd.c Log Message: ----------- teamd: add "debug_level" config option Signed-off-by: Jiri Pirko <jiri(a)resnulli.us> Commit: 9c91d7533a1a6496b9ce0f186af26a1bb4592ae9 https://github.com/jpirko/libteam/commit/9c91d7533a1a6496b9ce0f186af26a1bb4… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-13 (Tue, 13 May 2014) Changed paths: M man/teamd.conf.5 Log Message: ----------- man teamd.conf: remove "mandatory" since the options are no longer mandatory Signed-off-by: Jiri Pirko <jiri(a)resnulli.us> Compare: https://github.com/jpirko/libteam/compare/2551bec6d7bb...9c91d7533a1a

1 0

[jpirko/libteam] cb26d7: libteam: add team_change_handler_register_head fun...
by GitHub 12 May '14

12 May '14

Branch: refs/heads/master Home: https://github.com/jpirko/libteam Commit: cb26d75f3837edf65b93d75b7e70f6538be05b53 https://github.com/jpirko/libteam/commit/cb26d75f3837edf65b93d75b7e70f6538b… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-12 (Mon, 12 May 2014) Changed paths: M include/team.h M libteam/libteam.c Log Message: ----------- libteam: add team_change_handler_register_head function Signed-off-by: Jiri Pirko <jiri(a)resnulli.us> Commit: 0dc5ec792d35625094d8f0dc32d58fbdbc2c24d7 https://github.com/jpirko/libteam/commit/0dc5ec792d35625094d8f0dc32d58fbdbc… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-12 (Mon, 12 May 2014) Changed paths: M teamd/teamd.c Log Message: ----------- teamd: register debug callback at the start of callbacks list Signed-off-by: Jiri Pirko <jiri(a)resnulli.us> Commit: 2551bec6d7bbc7b5c8ab301ed8de9a83f892de99 https://github.com/jpirko/libteam/commit/2551bec6d7bbc7b5c8ab301ed8de9a83f8… Author: Jiri Pirko <jiri(a)resnulli.us> Date: 2014-05-12 (Mon, 12 May 2014) Changed paths: M teamd/teamd.c M teamd/teamd.h M teamd/teamd_state.c Log Message: ----------- teamd: allow to change debug level during run Signed-off-by: Jiri Pirko <jiri(a)resnulli.us> Compare: https://github.com/jpirko/libteam/compare/820f9f217178...2551bec6d7bb

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

libteam May 2014