Am 13.06.2016 um 17:50 schrieb Fabien Blanchet:
Le 13/06/2016 à 17:32, ali hagigat a écrit :
On 6/13/16, Peter Robinson pbrobinson@gmail.com wrote:
none using an
On Mon, Jun 13, 2016 at 2:29 PM, ali hagigat hagigatali@gmail.com wrote:
On 6/13/16, Peter Robinson pbrobinson@gmail.com wrote:
On Mon, Jun 13, 2016 at 11:34 AM, ali hagigat hagigatali@gmail.com wrote:
I want to use the Fedora 23 image with Odroid, XU4/3.
I am using the following link: https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation
But there is no comment to write uboot to SD card.
/usr/share/uboot/odroid-xu3 has two files: u-boot.dtb u-boot.bin
How I should write these files on the final image?
We don't support the XU4 on Fedora 23, it is supported on Fedora 24, you should be able to run the 24 RC quite OK on it, I emailed this list about the process a few weeks ago (see list archives) with the details. There's extra steps for the odroid devices as they require binary blobs we can't redistribute.
Peter
Thank you very much for the reply. Is there pre built images for Fedora+XU4/3? I appreciate any link you may know
Yes, the standard Fedora 24 images (choose which one you want) have support for both the XU3 and XU4. They all have the u-boot and kernel binaries that are needed. They DO NOT have the binaries I mentioned before (because we can't legally redistribute them)
Flash the image you want with arm-image-installer with the --target=none option plus any others you need.
You then need to follow the README.odroid to get them binary bits and flash the Fedora u-boot with it.
http://git.denx.de/?p=u-boot.git;a=blob_plain;f=doc/README.odroid;hb=HEAD
README.odroid mentions some files like bl1.bin, tzsw.bin, bl2.bin, ... So i need to build and make "u-boot " project to produce those files? or I can download those files directly? in this case could you please attach the direct links for those files? Thank you very much for your valuable answers and sorry to take up your time
Hi,
You will find all needed information on odroid wiki (chapter Installation): http://odroid.com/dokuwiki/doku.php?id=en:xu3_building_u-boot
Best regards Fabien _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://lists.fedoraproject.org/admin/lists/arm@lists.fedoraproject.org
Hi there,
I'm also in the process to bring Fedora to my Odroid XU4. Waht I've done:
1. Step [root@rechner1 ARM]# /usr/bin/arm-image-installer --image=Fedora-Minimal-armhfp-Rawhide-20160612.n.0-sda.raw.xz --target=none --media=/dev/sdb -y --addconsole
===================================================== = Selected Image: = Fedora-Minimal-armhfp-Rawhide-20160612.n.0-sda.raw.xz = Selected Media : /dev/sdb = U-Boot Target : none = Console for none will be added. =====================================================
***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** ***************************************************** = Writing: = Fedora-Minimal-armhfp-Rawhide-20160612.n.0-sda.raw.xz = To: /dev/sdb .... 0+221247 Datensätze ein 0+221247 Datensätze aus 2146435072 Bytes (2,1 GB) kopiert, 160,826 s, 13,3 MB/s = Writing image complete! = No U-Boot will be installed.
= Installation Complete! Insert into the none and boot.
2. Step [root@rechner1 U-Boot]# ./sd_fusing.1M.sh /dev/sdb /dev/sdb reader is identified. BL1 fusing 30+1 Datensätze ein 30+1 Datensätze aus 15616 Bytes (16 kB) kopiert, 0,86316 s, 18,1 kB/s BL2 fusing 28+1 Datensätze ein 28+1 Datensätze aus 14592 Bytes (15 kB) kopiert, 0,0811976 s, 180 kB/s u-boot fusing 1064+1 Datensätze ein 1064+1 Datensätze aus 545023 Bytes (545 kB) kopiert, 1,70465 s, 320 kB/s TrustZone S/W fusing 512+0 Datensätze ein 512+0 Datensätze aus 262144 Bytes (262 kB) kopiert, 0,968704 s, 271 kB/s U-boot image is fused successfully. Eject /dev/sdb and insert it again.
3. Step Boot
U-Boot 2016.05 (May 19 2016 - 15:01:47 +0000) for ODROID-XU3
CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... starting USB... USB0: USB EHCI 1.00 USB1: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 USB2: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 2 USB Device(s) found scanning bus 2 for devices... 2 USB Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... unable to connect. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3
Retry time exceeded; starting again missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-exynos Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set missing environment variable: bootfile Retrieving file: pxelinux.cfg/default Waiting for Ethernet connection... unable to connect. *** ERROR: `serverip' not set Config file not found Waiting for Ethernet connection... unable to connect. BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3
Retry time exceeded; starting again ODROID-XU3 #
Why does this board didn't boot the Fedora-Kernel?
Waht is missing?
Thanks Andreas