Hi Fabian and Ken,
On Tue, Jun 19, 2018 at 10:42 AM, Fabian Affolter fab@fedoraproject.org wrote:
On 06/19/2018 08:39 AM, Ken Harris wrote:
On Sun, Jun 17, 2018 at 5:07 AM, Peter Robinson pbrobinson@gmail.com
wrote:
On Sun, Jun 17, 2018 at 3:58 AM, Ken Harris kjh@hokulea.org wrote:
I bought a Udoo Neo and put Fedora on it. It works well, but when I plug in USB devices, they don't show up.
Lucky you. Fedora doesn't work on my UDOO NEO FULL. Not booting and my guess is that I'm running in the issue Peter outlined in this response [1].
Just a follow up on this. I pulled some patches in to 4.18/rawhide and the latest images with 4.18 rc4 are booting and seems to be stable for me.
Fabian if you get a chance I'd like to see if you see similar. For reference I used Fedora-Minimal-armhfp-Rawhide-20180710.n.0-sda.raw.xz
So now back to the original problem. So USB doesn't hotplug for me either but a device works if it's there from boot. I seem to remember a similar issue on another device, I'll see if I can work that out when I get a moment, I suspect there's a GPIO that needs to be wired up in the DT or similar.
Also bluetooth doesn't work for me but I also know what the fix is for that so I'll put together a patch when I get a moment.
Let me know if there's anything else, I've only just got it up so I've not had a chance to look too closely. I also intend to get Zephyr [1] running on the Cortex-M4 processor and probably look at Open-AMP [2] for it too just FYI.
[1] https://github.com/zephyrproject-rtos/zephyr/pull/7123 [2] https://github.com/OpenAMP