kde February 2021

kde@lists.fedoraproject.org

11 participants
13 discussions

Release criteria proposal: networking requirements
by Adam Williamson 01 Mar '22

01 Mar '22

Hi folks! So at this week's blocker review meeting, the fact that we don't have explicit networking requirements in the release criteria really started to bite us. In the past we have squeezed networking-related issues in under other criteria, but for some issues that's really difficult, notably VPN issues. So, we agreed we should draft some explicit networking criteria. This turns out to be a big area and quite hard to cover (who'd've thought!), but here is at least a first draft for us to start from. My proposal would be to add this to the Basic criteria. I have left out some wikitext stuff from the proposal for clarity; I'd add it back in on actually applying the proposed changes. It's just formatting stuff, nothing that'd change the meaning. Anyone have thoughts, complaints, alternative approaches, supplements? Thanks! === Network requirements === Each of these requirements apply to both installer and installed system environments. For any given installer environment, the 'default network configuration tools' are considered to be those the installer documents as supported ways to configure networking (e.g. for anaconda-based environments, configuration via kernel command line options, a kickstart, or interactively in anaconda itself are included). ==== Basic networking ==== It must be possible to establish both IPv4 and IPv6 network connections using DHCP and static addressing. The default network configuration tools for the console and for release-blocking desktops must work well enough to allow typical network connection configuration operations without major workarounds. Standard network functions such as address resolution and connections with common protocols such as ping, HTTP and ssh must work as expected. Footnote titled "Supported hardware": Supported network hardware is hardware for which the Fedora kernel includes drivers and, where necessary, for which a firmware package is available. If support for a commonly-used piece or type of network hardware that would usually be present is omitted, that may constitute a violation of this criterion, after consideration of the [[Blocker_Bug_FAQ|hardware-dependent- issues|normal factors for hardware-dependent issues]]. Similarly, violations of this criteria that are hardware or configuration dependent are, as usual, subject to consideration of those factors when determining whether they are release-blocking ==== VPN connections ==== Using the default network configuration tools for the console and for release-blocking desktops, it must be possible to establish a working connection to common OpenVPN, openconnect-supported and vpnc-supported VNC servers with typical configurations. Footnote title "Supported servers and configurations": As there are many different VPN server applications and configurations, blocker reviewers must use their best judgment in determining whether violations of this criterion are likely to be encountered commonly enough to block a release, and if so, at which milestone. As a general principle, the more people are likely to use affected servers and the less complicated the configuration required to hit the bug, the more likely it is to be a blocker. -- Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net

4 7

How to set default session type to Plasma for sddm
by Roderick Johnstone 29 Oct '21

29 Oct '21

Hi How do I set the default session type for sddm to offer to be Plasma? I'm currently getting Gnome Classic? This is F22. Thanks Roderick Johnstone

7 13

Add options to display configuration?
by S Bob 07 Mar '21

07 Mar '21

All; I'm running Fedora 33 on an LG Gram 17. I have a BenQ EX2780Q External Monitor. If I go to System Settings --> Display and Monitor I can set the external monitor to a range of resolutions, however the resolution I want is not on the list. I have a script I can run as root to set the resolution I want: #!/bin/bash # cvt 2160 1200 60 xrandr --newmode "2160x1200_60.00" 217.25 2160 2312 2536 2912 1200 1203 1213 1245 -hsync +vsync xrandr --addmode HDMI-1 "2160x1200_60.00" xrandr --output HDMI-1 --mode "2160x1200_60.00" However, I would like the 2160x1200 setting to be added to the list in System Settings --> Display and Monitor permanently, how do I do this? Can I add an xorg.conf file? If so does anyone have any simple examples? Thanks in advance

2 1

[Fedocal] Reminder meeting : KDE SIG
by ngompa＠fedoraproject.org 28 Feb '21

28 Feb '21

Dear all, You are kindly invited to the meeting: KDE SIG on 2021-03-01 from 18:00:00 to 19:00:00 UTC At https://meet.kde.org/b/ale-swq-39j The meeting will be about: Regular meeting for the KDE SIG Current Topics: https://pagure.io/fedora-kde/SIG/issues?status=Open&tags=meeting More information available at: [https://fedoraproject.org/wiki/SIGs/KDE](https://fedoraproject.org/wiki/SIG… Source: https://apps.fedoraproject.org/calendar/meeting/9876/

1 0

User directories not present in fresh F34 KDE install
by Jorma Penala 26 Feb '21

26 Feb '21

The default user directories seem to be missing from F34 KDE spin. After fresh install from latest compose, the only directory present is Desktop. One has to run xdg-user-dirs-update manually to generate Documents, Music etc.

4 5

No login screen after update for VMWare Fusion fedora 33 VM
by Barry Scott 23 Feb '21

23 Feb '21

I updated my VM and I no logged have a login screen. The only thing I have spotted at the moment is a problem with sddm-helper. # systemctl status sddm ● sddm.service - Simple Desktop Display Manager Loaded: loaded (/usr/lib/systemd/system/sddm.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2021-01-23 16:30:10 GMT; 47s ago Docs: man:sddm(1) man:sddm.conf(5) Main PID: 934 (sddm) Tasks: 4 (limit: 5828) Memory: 84.7M CPU: 448ms CGroup: /system.slice/sddm.service ├─934 /usr/bin/sddm └─937 /usr/libexec/Xorg -nolisten tcp -auth /var/run/sddm/{30741cdf-5986-4495-a598-b44f1a9f322d} -background none -noreset -displayfd 16 -seat > Jan 23 16:30:10 vmf33.chelsea.private systemd[1]: Started Simple Desktop Display Manager. Jan 23 16:30:11 vmf33.chelsea.private sddm-helper[943]: pam_unix(sddm-greeter:session): session opened for user sddm(uid=995) by (uid=0) Jan 23 16:30:15 vmf33.chelsea.private sddm[934]: Auth: sddm-helper exited with 11 Any one else seeing this? I attempted to roll back the transaction but dnf history rollback did nothing and did not report an error either. I did try rolling back parts of the update to did not manage to find what might have been the cause. Barry

6 12

[Fedocal] Reminder meeting : KDE SIG
by ngompa＠fedoraproject.org 21 Feb '21

21 Feb '21

Dear all, You are kindly invited to the meeting: KDE SIG on 2021-02-22 from 18:00:00 to 19:00:00 UTC At https://meet.kde.org/b/ale-swq-39j The meeting will be about: Regular meeting for the KDE SIG Current Topics: https://pagure.io/fedora-kde/SIG/issues?status=Open&tags=meeting More information available at: [https://fedoraproject.org/wiki/SIGs/KDE](https://fedoraproject.org/wiki/SIG… Source: https://apps.fedoraproject.org/calendar/meeting/9876/

1 0

[Fedocal] Reminder meeting : KDE SIG
by ngompa＠fedoraproject.org 14 Feb '21

14 Feb '21

Dear all, You are kindly invited to the meeting: KDE SIG on 2021-02-15 from 18:00:00 to 19:00:00 UTC At https://meet.kde.org/b/ale-swq-39j The meeting will be about: Regular meeting for the KDE SIG Current Topics: https://pagure.io/fedora-kde/SIG/issues?status=Open&tags=meeting More information available at: [https://fedoraproject.org/wiki/SIGs/KDE](https://fedoraproject.org/wiki/SIG… Source: https://apps.fedoraproject.org/calendar/meeting/9876/

1 0

sddm auto-resize in VM (F34)
by Ed Greshko 13 Feb '21

13 Feb '21

I installed Fedora-KDE-Live-x86_64-34-20210212 in a qemu VM. I am unable to get the guest to auto-resize when I expand the console window. I am also unable to select an alternate display size with system-settings or xrandr (using plasma on X11). If I select Virtio as the video card I can use system-settings to select a reasonable size but still unable to get auto-resize to work. With the Workstation version of F34 auto-resize works as desired. So, I installed gdm on the F34 spin and now auto-resize works. It therefore seems a problem with sddm. I didn't locate a BZ to address this. Is this a known issue being worked? Ed -- People who believe they don't make mistakes have already made one.

1 0

repo disabled, F34 Test
by Ed Greshko 12 Feb '21

12 Feb '21

Is there any reason why the fedora.repo is disabled in the F34 test spins? -- People who believe they don't make mistakes have already made one.

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

kde February 2021