kde July 2021

kde@lists.fedoraproject.org

20 participants
21 discussions

Release criteria proposal: networking requirements
by Adam Williamson 01 Mar '22

01 Mar '22

Hi folks! So at this week's blocker review meeting, the fact that we don't have explicit networking requirements in the release criteria really started to bite us. In the past we have squeezed networking-related issues in under other criteria, but for some issues that's really difficult, notably VPN issues. So, we agreed we should draft some explicit networking criteria. This turns out to be a big area and quite hard to cover (who'd've thought!), but here is at least a first draft for us to start from. My proposal would be to add this to the Basic criteria. I have left out some wikitext stuff from the proposal for clarity; I'd add it back in on actually applying the proposed changes. It's just formatting stuff, nothing that'd change the meaning. Anyone have thoughts, complaints, alternative approaches, supplements? Thanks! === Network requirements === Each of these requirements apply to both installer and installed system environments. For any given installer environment, the 'default network configuration tools' are considered to be those the installer documents as supported ways to configure networking (e.g. for anaconda-based environments, configuration via kernel command line options, a kickstart, or interactively in anaconda itself are included). ==== Basic networking ==== It must be possible to establish both IPv4 and IPv6 network connections using DHCP and static addressing. The default network configuration tools for the console and for release-blocking desktops must work well enough to allow typical network connection configuration operations without major workarounds. Standard network functions such as address resolution and connections with common protocols such as ping, HTTP and ssh must work as expected. Footnote titled "Supported hardware": Supported network hardware is hardware for which the Fedora kernel includes drivers and, where necessary, for which a firmware package is available. If support for a commonly-used piece or type of network hardware that would usually be present is omitted, that may constitute a violation of this criterion, after consideration of the [[Blocker_Bug_FAQ|hardware-dependent- issues|normal factors for hardware-dependent issues]]. Similarly, violations of this criteria that are hardware or configuration dependent are, as usual, subject to consideration of those factors when determining whether they are release-blocking ==== VPN connections ==== Using the default network configuration tools for the console and for release-blocking desktops, it must be possible to establish a working connection to common OpenVPN, openconnect-supported and vpnc-supported VNC servers with typical configurations. Footnote title "Supported servers and configurations": As there are many different VPN server applications and configurations, blocker reviewers must use their best judgment in determining whether violations of this criterion are likely to be encountered commonly enough to block a release, and if so, at which milestone. As a general principle, the more people are likely to use affected servers and the less complicated the configuration required to hit the bug, the more likely it is to be a blocker. -- Adam Williamson Fedora QA Community Monkey IRC: adamw | Twitter: AdamW_Fedora | XMPP: adamw AT happyassassin . net http://www.happyassassin.net

4 7

How to set default session type to Plasma for sddm
by Roderick Johnstone 29 Oct '21

29 Oct '21

Hi How do I set the default session type for sddm to offer to be Plasma? I'm currently getting Gnome Classic? This is F22. Thanks Roderick Johnstone

7 13

Compose key stopped working
by Emmett Culley 08 Aug '21

08 Aug '21

I have the compose key set to Scroll lock, but is seems to ignored. I've tried setting a different compose key, but that did not work either. If I type Compose o o I expected a degree symbol to get printed, but instead all I see in oo Nothing I've found on on Google tells me anything I haven't already tried. window manager = sddm (X11) KDE on Fedora 34 fully updated.

3 8

plasmashell crashes on right click in menu
by Matthew Lavigne 30 Jul '21

30 Jul '21

Posting here as a question before I bug this (first time back on Plasma in a long time). F34 current Looks like plasma-5.22.3-1 (plasma-desktop-5.22.3-1.fc34.x86_64) Issue: When looking to add items to the taskbar (similar to Cinnamon) I select the application that I want to add and right click.... Immediately plasmashell goes away. It does restart. Frustrating in that there has to be a way to move apps to the panels to have access to them without pinning but either I am missing it or doing something wrong. From a terminal did the following: killall plasmashell plasmashell& Take the above action and get this in the shell: trying to show an empty dialog file:///usr/share/plasma/plasmoids/org.kde.plasma.kickoff/contents/ui/LeaveButtons.qml:69:5: QML ToolBu tton: Binding loop detected for property "display" QFont::setPointSizeF: Point size <= 0 (0.000000), must be greater than 0 file:///usr/share/plasma/plasmoids/org.kde.plasma.printmanager/contents/ui/PopupDialog.qml:91:17: Unabl e to assign [undefined] to QString file:///usr/lib64/qt5/qml/org/kde/plasma/components/ModelContextMenu.qml: 38:1: QML ModelContextMenu: Accessible must be attached to an Item trying to show an empty dialog KCrash: Attempting to start /usr/bin/plasmashell KCrash: Application 'plasmashell' crashing... KCrash: Attempting to start /usr/libexec/drkonqi Tried with an existing user that has had a live home dir for a long time and with a new user (only ever logged into Plasma) Looking to see if I am missing something prior to putting in a bug. Any thoughts? Matthew

5 8

Updated KDE Plasma Desktop ready for testing on CentOS Stream 8
by Troy Dawson 29 Jul '21

29 Jul '21

An updated qt5 in CentOS Stream 8 allowed us to update KDE Plasma Desktop. I believe everything is in place and ready for use and/or testing. This is for CentOS Stream 8 only, at this time. ===How to Install [1] = Install epel-release dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm = Enable PowerTools dnf config-manager --enable powertools = Install KDE dnf group install kde-desktop-environment or dnf group install kde-desktop (Optional) dnf group install kde-apps (Optional) dnf group install kde-media (Optional) dnf group install kde-education (Optional) dnf install okular (Optional) dnf group install kde-software-development (Optional) dnf group install kf5-software-development === KNOWN PACKAGE ISSUES == UNINSTALLABLE PACKAGES * kaccounts-providers - no signon-ui * kigo - no gnugo * lokalize - no translate-toolkit , needs rebuilding on python3 == UNBUILT PACKAGES * polkit-qt5 - need branch and build of polkit-qt-1 * kde-gtk-config - needs sassc * digikam - can't find opencv despite it being installed == UN-UPDATED PACKAGES (but still install and run) * kpmcore - would need a newer util-linux than available in RHEL 8 * kde-partitionmanager - would need a newer kpmcore Feel free to install and test. Troy Dawson [1] - https://fedoraproject.org/wiki/SIGs/KDE/EPEL#Installation

3 8

Re: [CentOS-devel] Updated KDE Plasma Desktop ready for testing on CentOS Stream 8
by Troy Dawson 28 Jul '21

28 Jul '21

On Wed, Jul 28, 2021 at 9:18 AM Simon Matter <simon.matter(a)invoca.ch> wrote: > > First off, thank you very much for that. > > That is perhaps the best "Here is my environment" anyone has ever sent > me. > > > > The problem is that you don't have the epel-next repo anywhere. > > I wasn't aware of epel-next, is it the EPEL for CentOS Stream or what > exactly? > > Yes. It is supposed to be layered on top of the regular epel repository because it doesn't have all the epel packages. epel-next builds off centos-stream instead of RHEL, like regular epel does. It only has those packages that need to be rebuilt in stream due to some library or version update. In this case, qt5 was updated in stream from 5.12 to 5.15, thus all the kde desktop needed to be rebuilt (and we updated kde as well). Once RHEL 8.5 is released, I will rebuild all those packages on normal epel8 and we won't need them in the epel-next repository. If you are running centos-stream, and do a dnf install epel-release you should automatically get epel-next-release. But it looks like if you are doing a kickstart install, that doesn't work, so it will have to be listed. https://fedoraproject.org/wiki/EPEL_Next Thanks, > Simon > > > At the very least you need to have "epel-next-release" in > > kickstarts/8/base.ks > > If you wanted the newer kde packages installed during install you need to > > add the epel-next repo to kickstarts/8/base-repo.ks > > I believe it should be > > repo --name=epel-next --mirrorlist= > > > https://mirrors.fedoraproject.org/metalink?repo=epel-next-$releasever&arch=… > > or possibly just > > repo --name=epel-next --mirrorlist= > > > https://mirrors.fedoraproject.org/metalink?repo=epel-next-$releasever&arch=… > > > > Hope this helps. > > Troy > > > > On Wed, Jul 28, 2021 at 3:13 AM Massi aka Ergosum > > <massi.ergosum(a)gmail.com> > > wrote: > > > >> Il giorno mar 27 lug 2021 alle ore 17:24 Troy Dawson > >> <tdawson(a)redhat.com> ha scritto: > >> > > >> > I've been able to install, and update all of the packages listed here. > >> > So, unless you are able to give more details about how your machine is > >> setup, there isn't much I can help with. > >> > > >> > >> A "fresh install" means an image build using the following kickstarts: > >> [1] > >> [2]. > >> I'm using repos listed here [3]. > >> > >> I'm still investigating, but I suspect I'm not using the latest > >> versions. > >> > >> Thanks > >> Massimiliano > >> > >> [1] https://github.com/mbugni/centos-remix > >> [2] > >> > https://github.com/mbugni/centos-remix/blob/master/kickstarts/8/l10n/kde-wo… > >> [3] > >> > https://github.com/mbugni/centos-remix/blob/master/kickstarts/8/base-repo.ks > >> _______________________________________________ > >> kde mailing list -- kde(a)lists.fedoraproject.org > >> To unsubscribe send an email to kde-leave(a)lists.fedoraproject.org > >> Fedora Code of Conduct: > >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > >> List Archives: > >> > https://lists.fedoraproject.org/archives/list/kde@lists.fedoraproject.org > >> Do not reply to spam on the list, report it: > >> https://pagure.io/fedora-infrastructure > >> > > _______________________________________________ > > CentOS-devel mailing list > > CentOS-devel(a)centos.org > > https://lists.centos.org/mailman/listinfo/centos-devel > > > > > _______________________________________________ > CentOS-devel mailing list > CentOS-devel(a)centos.org > https://lists.centos.org/mailman/listinfo/centos-devel > >

1 0

Some JPGs on the desktop don't preview
by Jonathan Ryshpan 27 Jul '21

27 Jul '21

My desktop is set to preview, but there are some small files, JPGs generated by screen shots, which are generally (but now always) not previewed. This is not much of a problem but it is irritating. Any ideas on how to investigate? The system: Operating System: Fedora 34 KDE Plasma Version: 5.22.3 KDE Frameworks Version: 5.83.0 Qt Version: 5.15.2 Kernel Version: 5.13.4-200.fc34.x86_64 (64-bit) Graphics Platform: X11 Processors: 8 × Intel® Core™ i7-4790K CPU @ 4.00GHz Memory: 15.5 GiB of RAM Graphics Processor: Mesa DRI Intel® HD Graphics 4600 -- Sincerely Jonathan Ryshpan <jonrysh(a)pacbell.net> If God lived on earth, people would break all his windows.

1 0

[Fedocal] Reminder meeting : KDE SIG
by ngompa＠fedoraproject.org 25 Jul '21

25 Jul '21

Dear all, You are kindly invited to the meeting: KDE SIG on 2021-07-26 from 13:00:00 to 14:00:00 US/Eastern At https://meet.kde.org/b/ale-swq-39j The meeting will be about: Regular meeting for the KDE SIG Current Topics: https://pagure.io/fedora-kde/SIG/issues?status=Open&tags=meeting More information available at: [https://fedoraproject.org/wiki/SIGs/KDE](https://fedoraproject.org/wiki/SIG… Source: https://calendar.fedoraproject.org//meeting/9876/

1 0

Wrong program starts when run from Dolphin
by Jonathan Ryshpan 23 Jul '21

23 Jul '21

I have build an old version of audacity (audacity-2.4) from source and placed the executable in ~/bin. When I start audacity from the command line (say): $ audacity-2.4 98.03.14-a.aup everything runs as it should. But when attempt to start audacity-2.4 from dolphin clicking dolphin->98.03.14-a.aup->rt-click/Open With->Other Application- >audacity-2.4 the program started is audacity not audacity-2.4 . Similarly it's not possible to start audacity-2.4 from the Start Button on the Panel. I don't have the problem with xv, which I also build from source and placed in ~/bin . What's happening? -- Sincerely Jonathan Ryshpan <jonrysh(a)pacbell.net> We are Pentium of Borg. Division is futile. You will be approximated. -- Joe Klemmer

3 6

New Discover
by Jonathan Ryshpan 21 Jul '21

21 Jul '21

When Discover reports an upgrade with system implications (say a new kernel) and the user allows the upgrade (by clicking the appropriate button): 1. Discover downloads the files for the upgrade 2. Discover requests a reboot. After the user allows the reboot 3. Discover reboots the system 4. Discover installs the new kernel (or whatever) 5. Discover reboots the system (again) What is the reason for the additional reboot before installing the new kernel (step 3)? -- Sincerely Jonathan Ryshpan <jonrysh(a)pacbell.net> Dance, as if nobody's watching, Love, as if you've never been hurt, Sing, as if no one can hear you, Work, as if you don't need the money, Live, as if heaven is on earth. -- Rumi

8 10

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

kde July 2021