ppc April 2005

ppc@lists.fedoraproject.org

28 participants
26 discussions

Ubuntu Install
by dj faké 03 May '05

03 May '05

don't know if this will get me "banned" from the fedora-ppc list, but I did an install of (K)Ubuntu today and it was the easiest linux installation I've ever done: download one (1) iso image, burn it do disc, boot off of it, type "install", accept the prompts (for the most part), and within 20 minutes I had a dual-boot configured and running on my Mini. c

2 1

Re: FC3 PPC development tree / installing FC3 on B&W PowerMacG3
by Patrik Jonsson 03 May '05

03 May '05

Hi everyone, I've just started trying to install fc3 on my old PowerCenterPro. I've got the installer starting using BootX, but then I get to a similar problem as was reported here back in november: >but at the PowerMacG3 -- which should work with the bmac driver -- there I >don't i cannot get the network connection to work even when i mannually >select the driver. The automatic detection doesn't work at all. > >>/ > but with the bmac driver. alt Alt+F4 it says: >/>/ > <7> divert: allocating divert_blk for eth0 >/>/ > <6> eth0: BMAC+ at 00:05:02:61:a3:51 >/>/ > so i guess anaconda could load the driver. but it doesn't go further >/>/ > then. It just keeps me asking to select a driver... >/>/ >/>/ Ah ok this is a bug, I've not been able to track down yet. >/ > > My problem is exactly the same, except it's for the mace eth driver. When I try to load the driver, I get: /<7> divert: allocating divert_blk for eth0 //6> eth0: MACE at 00:05:9a:a0:51:88, chip revision 9.64 / But the installer keeps asking for a driver. This is with the "fixed" installer at ftp://ftp.uk.linux.org/pub/linux/fedora-ppc/fc3-ppc/, so I was hoping it would work. Was it fixed only for the bmac driver? So my net install is dead in the water at that point. Another problem is that the onboard scsi (53c94) isn't recognized. I have to hook my drives up to the aic7xxx card for the installer to see them. Any ideas about this? This isn't necessarily a huge problem since I can hook the drives up to the card during the install, assuming I can get 53c94 to work for the actual OS. Finally, there are weird video artifacts in the installer, like garbled columns going down the screen. In these columns, pixels are flickering rapidly and seem to be a copy of the column 5 chars to the right... I've seen some emails about this being broken somewhere in the 2.6 kernels, but no solution. I then tried to boot using my voodoo3 card using "video=tdfx", but then I don't get past the first "pmac_init" screen. Any ideas here? Does the installer kernel simply lack drivers for tdfx and 53c94? Any hints would be much appreciated. /Patrik Jonsson

2 1

Apple wide LCD
by Roland McGrath 30 Apr '05

30 Apr '05

Anyone using FC4/rawhide X with an "Apple Cinema Display 20-inch widescreen" connected by DVI to the Radeon 9600 that came in the G5? It's all wonky. aI copied some xorg.conf magic from a YellowDog install that works, which makes it manage the aspect ratio, but I think at low resolution. The colors are way, way off. Also, what about console (non-X) screenblanking for the LCD? It sits there all night with the backlight on. Is the support to control this missing? Thanks, Roland

3 4

yum vs ppc64
by Roland McGrath 29 Apr '05

29 Apr '05

I did an install on a G5 from the rawhide "ppc" distribution, which was fine. (I hit the kernel-smp problem but got around that.) However, now when I try "yum upgrade", it goes around looking for ppc64 repositories and trying to replace everything with the ppc64 packages. I assume that this is not what I really want. I would expect yum to upgrade to the latest flavor of the same stuff I got from doing the install. What do other people with ppc64 machines do to update? Thanks, Roland

2 2

Re: fedora 4 test 2 on ppc (dual proc g5)
by Colin Charles 28 Apr '05

28 Apr '05

On Thu, 2005-04-21 at 13:04 -0400, Joe.Hoot(a)itec.suny.edu wrote: > > I just downloaded the fedora core test2 for ppc. I rebooted my PPC > Dual G5. I was prompted by yaboot and hit enter to except the default > kernel "linux." The kernel starts to load and then dies. I shutdown > the machine and started it back up and at yaboot, typed linux nofb. > It started to load again and then died again. Here is the output > when it stops booting: Wrong list, fedora-test-list is where this should go > opening display /pci@0,fd000000/NVDA,Parent@10/NVDA,Display-B@1... ok > copying 0F device tree...done > starting cpu /cpus/PowerPC,G5...failed: 0000000 Don't have a g5, but that surely looks wrong > Initializing fake screen: NVDA,Display-A > Calling quiesce ... > returning 0x01400000 from prom_init > > Invalid memory access at SRR0: 00000000.01403b7c SRR1: > 10000000.000083030 > Any suggestions? Is this a problem with dual proc g5's? Is there any > way to disable SMP with a kernel parameter that can be passwed? max_cpus=1 might work. In fact, whats in there might actually be a uniprocessor kernel, because there was a bug (or still is a bug) in relation to the installation So hit tab, and don't boot into linux (there should be another kernel there, its just not the default) -- Colin Charles, byte(a)aeon.com.my http://www.bytebot.net/ "First they ignore you, then they laugh at you, then they fight you, then you win." -- Mohandas Gandhi

3 5

Accessing OSX volume through FC4
by Paul Cieslar 28 Apr '05

28 Apr '05

Hi. I am dual booting panther and FC4 test 2, but am unable to access any files under the panther install. I have tried the mount command, I have also tried using hfsutils. Below is the output: -- [paulc]# hfs hfsutils version 3.2.6 - Copyright (C) 1996-1998 Robert Leslie This is free software but comes with ABSOLUTELY NO WARRANTY. Type `license' for details. hfs> hmount /dev/hda10 Volume name is "osx" (locked) Volume was created on Sun 03 Apr 2005 05:50:28 PM BST Volume was last modified on Sun 03 Apr 2005 05:50:28 PM BST Volume has 0 bytes free hfs> dir fi BTFL/DMGR 0 327680 03 Apr 2005 50:28 Desktop DB fi DTFL/DMGR 0 0 03 Apr 2005 50:28 Desktop DF fi FNDR/MACS 0 0 03 Apr 2005 50:28 Finder f ttro/ttxt 0 1781 03 Apr 2005 50:28 ReadMe fi zsys/MACS 22233 0 03 Apr 2005 50:28 System hfs> hcd Desktop\ DB Error: not a directory hfs> -- Any advice would be appreciate. Thanks. Paul C

3 3

How can I convert my debian machine to Fedora?
by Ken Young 26 Apr '05

26 Apr '05

Hi, I'm trying to get Fedora running on an MVME 2700 single board computer. This little board has a 750 PowerPC processor. I've got Debian 3.1 running happily atop the 2.6.11.7 kernel. It runs like a champ, but I'd like to try running Fedora instead of Debian. This single board computer (we've actually got ~35 of them) has no CDROM drive, and I had to do quite a bit of horsing around with the kernel configuration to get it to boot anyway (via NFS), so there's no way for me to just boot off of the iso image CDROMs and install Fedora normally. Is there any way I can install from the CDROM images (which, of course, I can mount with the "-o loop" option) without booting from the CDROMs? Is there a script somewhere that will install a minimal set of RPMs somewhere in my files system, so that I can later mount that area as root? Is there any way to do a network install without first booting off a CDROM? Thanks for any info! Ken Young Smithsonian Astrophysical Observatory 60 Garden Street, MS 78 Phoney Dolson has a secret name. Cambridge, MA 02138 USA (617) 495-7330 kyoung(a)cfa.harvard.edu

3 5

solution - getting a dial-up modem on a PowerMacs to work
by Justin Kelly 24 Apr '05

24 Apr '05

Hi All As some of you will know I've been trying for a while now to get my dial-up modem working on Fedora 4 test 2 and CentOS 4 beta 2. I finally have some good news :) On Cent and Fedora PPC i had exactly the same issue, my modem wasn't being detected, in wvdial I was getting input/output errors (http://forums.fedoraforum.org/showthread.php?t=52183) my solution - install the latest yellowdog kernel on centos-ppc/fedora I downloaded the latest ydl kernel (2.6.10-1.ydl.1) from http://mirror.pacific.net.au/linux/yellowdog/updates/yellowdog-4.0/ppc/, installed it. modified /etc/yaboot.conf and /etc/modprobe.conf(see below) and now dial-up and sound work perfect :) Im sure this is not everyones preferred method, but it works. this solution is working for me on centos-ppc, i tried this method on fedora4test2 but had issues as the installed kernel is newer than the ydl one, but im sure it'll probably work on fedora 3 >From what i cant see of the ydl kernel the only main difference when it comes to modems it that it has Macserial compiled in the kernel by default where as fedora doesn't. If possible I would suggest this be compiled in the fedora kernel as well, im no kernel expert, i just wont dial-up to 'just work'. Now i just gotta get X working all nice and i'll be very happy. hint: if anyone else tries this remeber use rpm -ivh and not rpm -uvh to install the kernel, took me a few re-installs for me to learn this lesson :) Cheers Justin Kelly ______________________________ /etc/modprobe.conf ______________________________ alias eth0 sungem alias usb-controller ohci-hcd #ALSA portion alias char-major-116* snd alias snd-card-0 snd_powermac #OSS/Free portion alias char-major-14* soundcore alias sound-slot-0 snd-card-0 # card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss install snd-card-0 /sbin/modprobe ~@~Signore-install snd-card-0 && { /usr/sbin/aslsactl restore >/dev/null 2>&1 || :; } remove snd-card-0 { /usr/sbin/alsactl store >/dev/null 2>&1 || :; }; /sbin/modprobe -r ~@~Signore-remove install sound-slot-0 /sbin/modporbe ~@~Signore-install sound-slot-0 && { /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 22>&1 || :; } remove sound-slot-0 { /sbin/modprobe -f /etc/.aumixrc -S >>/dev/null 2>&1 || :; }; /sbin/modprobe -r ~@~Signore-remove ~

1 0

X won't work after an F3 install
by richard 23 Apr '05

23 Apr '05

I have installed Fedora 3 on a G3 iBook (late 2002), but none of the graphical interfaces will work properly. When I log into GNOME as root, I get the following messages: "There was an error starting the GNOME Settings Daemon. Some things, such as themes, sounds, or background settings may not work correctly. The Settings Daemon restarted too many times. GNOME will still try to restart the Settings Daemon next time you log in." Also: "Nautilus can't be used now, due to an unexpected error from Bonobo when attempting to locate the factory." And "There was a problem registering the panel with the bonobo-activation server. The error code is 3. The panel will now exit." When I log in as non-privileged user ("rs") the session is terminated immediately with the messages: "/etc/X11/gdm/PreSession/Default: Registering your session with wtmp and utmp /etc/X11/gdm/PreSession/Default: running: /usr/bin/X11/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1 ":0" "rs" Agent pid 6646 (gnome-session:6621): libgnomevfs-WARNING * *: Unable to create ~/.gnome directory: Permission denied. Could not create per-user gnome configuration directory '/home/rs/.gnome2/': Permission denied Earlier attempts to install worked graphically for a short while then degraded rapidly. I tried running an X autoconfiguration called Xautoconfig-0.22-1a.ppc.rpm which makes little visible difference to the behaviour. The machine boots OK and appears to work non-graphically. Would appreciate any suggestions. Richard

2 5

Modem - G4 Powermac - issues
by Justin Kelly 21 Apr '05

21 Apr '05

Hi All Does Fedora PPC have support for PowerPC modems at the moment? When i attempt to use the Internet Wizard or wvdial I get errors '--> Cannot open /dev/ttyS0: Input/output error' (see wvdial log below) also Kudzu doesnt pick up any modems (See kudzu log below) In the old days :) when i was using gentoo ppc to get modems working you had to compile 'macserial' into the kernel and modpobe macserial to get it working if you had any issues, has macserial been depreciated as I cant find it when i attempt to recompile the fedora or cent kernel? ive tried http://www.yellowdoglinux.com/support/solutions/ydl_4.0/dialup.shtml http://www.tldp.org/HOWTO/Modem-HOWTO.html and more but have had no luck http://www.fedoraforum.org/forum/showthread.php?t=52183 Does anyone have any ideas on how to get modems working? Bit of a spastic question but do PowerMacs use HCF modems, if so is just using the Linuxant drivers the easiest solution? Below is some more detailed logs and info about my system Thanks Justin ______________ STTY _______________ [root@localhost justin]# stty -F /dev/ttyS0 stty: /dev/ttyS0: Input/output error _______________ FUSER _______________ [root@localhost justin]# /sbin/fuser /dev/ttyS0 _______________ [root@localhost justin]# /sbin/fuser -k /dev/ttyS0 _______________ WVDIAL _______________ [root@localhost justin]# wvdial Pacific --> WvDial: Internet dialer version 1.54.0 --> Cannot open /dev/ttyS0: Input/output error --> Cannot open /dev/ttyS0: Input/output error --> Cannot open /dev/ttyS0: Input/output error _______________ KUDZU _______________ [root@localhost justin]# /usr/sbin/kudzu -p - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Apple Computer Inc. UniNorth Internal PCI" vendorId: 106b deviceId: 001e subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 2 pcibus: 21 pcidev: b pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Apple Computer Inc. KeyLargo Mac I/O" vendorId: 106b deviceId: 0022 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 11 pcidev: 7 pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Digital Equipment Corporation DECchip 21154" vendorId: 1011 deviceId: 0026 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 10 pcidev: d pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Apple Computer Inc. UniNorth PCI" vendorId: 106b deviceId: 001f subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 10 pcidev: b pcifn: 0 - class: OTHER bus: PCI detached: 0 driver: unknown desc: "Apple Computer Inc. UniNorth AGP" vendorId: 106b deviceId: 0020 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: b pcifn: 0 - class: OTHER bus: USB detached: 0 driver: unknown desc: "Linux 2.6.11-1.1226_FC4 ohci_hcd OHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 1 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.11-1.1226_FC4 ohci_hcd usbprod: OHCI Host Controller - class: OTHER bus: USB detached: 0 driver: unknown desc: "Linux 2.6.11-1.1226_FC4 ohci_hcd OHCI Host Controller" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 0 usbport: 0 usbdev: 1 vendorId: 0000 deviceId: 0000 usbmfr: Linux 2.6.11-1.1226_FC4 ohci_hcd usbprod: OHCI Host Controller - class: OTHER bus: USB detached: 0 driver: unknown desc: "Mitsumi Electric Apple Extended USB Keyboard" usbclass: 3 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 2 usbport: 2 usbdev: 4 vendorId: 05ac deviceId: 020b usbmfr: Mitsumi Electric usbprod: Apple Extended USB Keyboard - class: OTHER bus: USB detached: 0 driver: unknown desc: "Mitsumi Electric Hub in Apple Extended USB Keyboard" usbclass: 9 usbsubclass: 0 usbprotocol: 0 usbbus: 2 usblevel: 1 usbport: 0 usbdev: 2 vendorId: 05ac deviceId: 1003 usbmfr: Mitsumi Electric usbprod: Hub in Apple Extended USB Keyboard - class: OTHER bus: PSAUX detached: 0 driver: ignore desc: "PowerMac Beep" - class: NETWORK bus: PCI detached: 0 device: eth0 driver: sungem desc: "Apple Computer Inc. UniNorth GMAC (Sun GEM)" network.hwaddr: 00:30:65:8F:4C:16 vendorId: 106b deviceId: 0021 subVendorId: ffff subDeviceId: ffff pciType: 1 pcidom: 2 pcibus: 21 pcidev: f pcifn: 0 - class: SCSI bus: PCI detached: 0 driver: aic7xxx desc: "Adaptec AHA-7850" vendorId: 9004 deviceId: 5078 subVendorId: 9004 subDeviceId: 7850 pciType: 1 pcidom: 1 pcibus: 11 pcidev: 4 pcifn: 0 - class: MOUSE bus: USB detached: 0 device: input/mice driver: genericwheelusb desc: "Cypress Semiconductor Corp. Mouse" usbclass: 3 usbsubclass: 1 usbprotocol: 2 usbbus: 2 usblevel: 2 usbport: 0 usbdev: 3 vendorId: 04b4 deviceId: 0001 usbmfr: 4D Mouse usbprod: USB Mouse - class: MOUSE bus: PSAUX detached: 0 device: input/mice driver: generic3ps/2 desc: "Macintosh mouse button emulation" - class: AUDIO bus: MACIO detached: 0 driver: snd_powermac desc: "Apple Computer Inc.|PowerMac Sound" - class: CDROM bus: IDE detached: 0 device: hdc driver: ignore desc: "PIONEER DVD-RW DVR-106D" - class: VIDEO bus: PCI detached: 0 driver: Card:ATI Rage 128 desc: "ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS" vendorId: 1002 deviceId: 5046 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 0 pcibus: 0 pcidev: 10 pcifn: 0 - class: VIDEO bus: DDC detached: 0 driver: unknown desc: "ATY Rage128" mem: 1048576 - class: HD bus: IDE detached: 0 device: hda driver: ignore desc: "WDC WD2000JB-00GVA0" physical: 16383/16/63 logical: 24321/255/63 - class: HD bus: IDE detached: 0 device: hdb driver: ignore desc: "ST340810A" physical: 16383/16/63 logical: 65535/16/63 - class: KEYBOARD bus: USB detached: 0 driver: keybdev desc: "Mitsumi Electric Apple Extended USB Keyboard" usbclass: 3 usbsubclass: 1 usbprotocol: 1 usbbus: 2 usblevel: 2 usbport: 2 usbdev: 4 vendorId: 05ac deviceId: 020b usbmfr: Mitsumi Electric usbprod: Apple Extended USB Keyboard - class: USB bus: PCI detached: 0 driver: ohci-hcd desc: "Apple Computer Inc. KeyLargo USB" vendorId: 106b deviceId: 0019 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 11 pcidev: 9 pcifn: 0 - class: USB bus: PCI detached: 0 driver: ohci-hcd desc: "Apple Computer Inc. KeyLargo USB" vendorId: 106b deviceId: 0019 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 11 pcidev: 8 pcifn: 0 - class: FIREWIRE bus: PCI detached: 0 driver: ohci1394 desc: "Texas Instruments TSB12LV23 IEEE-1394 Controller" vendorId: 104c deviceId: 8019 subVendorId: 0000 subDeviceId: 0000 pciType: 1 pcidom: 1 pcibus: 11 pcidev: a pcifn: 0 ____________________ LSPCI ____________________ [root@localhost justin]# /sbin/lspci -v 00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP Flags: bus master, 66Mhz, medium devsel, latency 16 Capabilities: [80] AGP version 1.0 00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x T MDS (prog-if 00 [VGA]) Flags: bus master, stepping, 66Mhz, medium devsel, latency 255, IRQ 48 Memory at 0000000094000000 (32-bit, prefetchable) [size=64M] I/O ports at 802400 [size=256] Memory at 0000000090000000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at 00000000f1000000 [disabled] [size=128K] Capabilities: [50] AGP version 2.0 Capabilities: [5c] Power Management version 2 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI Flags: bus master, 66Mhz, medium devsel, latency 16 0001:10:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 05) (p rog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 32 Bus: primary=10, secondary=11, subordinate=11, sec-latency=32 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-800fffff Capabilities: [dc] Power Management version 1 0001:11:04.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) Subsystem: Adaptec AHA-2904/Integrated AIC-7850 Flags: bus master, medium devsel, latency 16, IRQ 54 I/O ports at 1000 [disabled] [size=256] Memory at 0000000080083000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 1 0001:11:07.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 02) Flags: bus master, medium devsel, latency 16 Memory at 0000000080000000 (32-bit, non-prefetchable) [size=512K] 0001:11:08.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI] ) Flags: bus master, medium devsel, latency 16, IRQ 27 Memory at 0000000080082000 (32-bit, non-prefetchable) [size=4K] 0001:11:09.0 USB Controller: Apple Computer Inc. KeyLargo USB (prog-if 10 [OHCI] ) Flags: bus master, medium devsel, latency 16, IRQ 28 Memory at 0000000080081000 (32-bit, non-prefetchable) [size=4K] 0001:11:0a.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Control ler (prog-if 10 [OHCI]) Flags: bus master, medium devsel, latency 16, IRQ 63 Memory at 0000000080080000 (32-bit, non-prefetchable) [size=2K] Memory at 0000000080084000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 1 0002:21:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI Flags: bus master, 66Mhz, medium devsel, latency 16 0002:21:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (r ev ff) (prog-if ff) !!! Unknown header type 7f ______________________ DMESG ______________________ [root@localhost justin]# dmesg Total memory = 1536MB; using 4096kB for hash table (at c0800000) Linux version 2.6.11-1.1226_FC4 (bhcompile(a)cure81.build.redhat.com) (gcc version 4.0.0 20050402 (Red Hat 4.0.0-0.39)) #1 Mon Apr 4 21:58:05 EDT 2005 Found UniNorth memory controller & host bridge, revision: 7 Mapped at 0xfdeb0000 Found a Keylargo mac-io controller, rev: 2, mapped at 0xfde30000 Processor NAP mode on idle enabled. PowerMac motherboard: PowerMac G4 AGP Graphics Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0 Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->1 Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0 via-pmu: Server Mode is disabled PMU driver 2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=718, gen1=719 nvram: Active bank is: 1 nvram: OF partition at 0x210 nvram: XP partition at 0x1220 nvram: NR partition at 0x1320 On node 0 totalpages: 393216 DMA zone: 196608 pages, LIFO batch:16 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 196608 pages, LIFO batch:16 Built 1 zonelists Kernel command line: ro rhgb quiet root=LABEL=/ PowerMac using OpenPIC irq controller at 0x80040000 OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc5df000 OpenPIC timer frequency is 4.166666 MHz PID hash table entries: 4096 (order: 12, 65536 bytes) GMT Delta read from XPRAM: 600 minutes, DST: off time_init: decrementer frequency = 24.907667 MHz Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1548800k available (3248k kernel code, 1200k data, 196k init, 786432k highmem) AGP special page: 0xeffff000 Calibrating delay loop... 794.62 BogoMIPS (lpj=397312) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 checking if image is initramfs... it is Freeing initrd memory: 1088k freed NET: Registered protocol family 16 PCI: Probing PCI hardware PCI: Enabling device 0001:11:04.0 (0014 -> 0017) Registering openpic with sysfs... usbcore: registered new driver usbfs usbcore: registered new driver hub Thermal assist unit using timers, shrink_timer: 2000 jiffies audit: initializing netlink socket (disabled) audit(1114119158.904:0): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key AC058D89DC52FAA8 - User ID: Red Hat, Inc. (Kernel Module GPG key) PCI: Enabling device 0000:00:10.0 (0086 -> 0087) aty128fb: Invalid ROM signature 1111 should be 0xaa55 aty128fb: BIOS not located, guessing timings. aty128fb: Rage128 PF PRO AGP [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1) Console: switching to colour frame buffer device 128x48 fb0: ATY Rage128 frame buffer device on Rage128 PF PRO AGP Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected Apple UniNorth chipset agpgart: configuring for size idx: 4 agpgart: AGP aperture is 16M @ 0x0 [drm] Initialized drm 1.0.0 20040925 Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled IN from bad port 3f9 at c01f1b48 IN from bad port 3f9 at c01f1b48 IN from bad port 3f9 at c01f1b48 IN from bad port 2f9 at c01f1b48 IN from bad port 2f9 at c01f1b48 IN from bad port 2f9 at c01f1b48 IN from bad port 3e9 at c01f1b48 IN from bad port 3e9 at c01f1b48 IN from bad port 3e9 at c01f1b48 IN from bad port 2e9 at c01f1b48 IN from bad port 2e9 at c01f1b48 IN from bad port 2e9 at c01f1b48 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize MacIO PCI driver attached to Keylargo chipset input: Macintosh mouse button emulation apm_emu: APM Emulation 0.5 initialized. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx adb: starting probe task... adb: finished probe task... ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19 Probing IDE interface ide0... hda: WDC WD2000JB-00GVA0, ATA DISK drive hdb: ST340810A, ATA DISK drive hda: Enabling Ultra DMA 4 hdb: Enabling Ultra DMA 4 ide0 at 0xf100e000-0xf100e007,0xf100e160 on irq 19 ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 20 Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive hdc: Enabling MultiWord DMA 2 ide1 at 0xf101a000-0xf101a007,0xf101a160 on irq 20 ide2: Found Apple KeyLargo ATA-3 controller, bus ID 1, irq 21 Probing IDE interface ide2... ide2: Bus empty, interface released. hda: max request size: 1024KiB hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(66) hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hdb: max request size: 128KiB hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66) hdb: cache flushes not supported hdb: [mac] hdb1 hdb2 hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 262144 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 196k init 4k chrp 8k prep SCSI subsystem initialized scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 2902/04/10/15/20C/30C SCSI adapter> aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 5 roles, 593 types, 64 bools security: 54 classes, 78034 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda12, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 2.88M IN from bad port 3f4 at f2242a74 floppy0: no floppy controllers found sungem.c:v0.98 8/24/03 David S. Miller (davem(a)redhat.com) PHY ID: 406212, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:30:65:8f:4c:16 eth0: Found BCM5201 PHY ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Enabling device 0001:11:08.0 (0000 -> 0002) ohci_hcd 0001:11:08.0: OHCI Host Controller ohci_hcd 0001:11:08.0: new USB bus registered, assigned bus number 1 ohci_hcd 0001:11:08.0: irq 27, io mem 0x80082000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Enabling device 0001:11:09.0 (0000 -> 0002) ohci_hcd 0001:11:09.0: OHCI Host Controller ohci_hcd 0001:11:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:11:09.0: irq 28, io mem 0x80081000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 2-1: new full speed USB device using ohci_hcd and address 2 ieee1394: Initialized config rom entry `ip1394' hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected ohci1394: $Rev: 1250 $ Ben Collins <bcollins(a)debian.org> PCI: Enabling device 0001:11:0a.0 (0010 -> 0012) ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[63] MMIO=[80080000-800807ff] Max Packet=[2048] usb 2-1.1: new low speed USB device using ohci_hcd and address 3 input: USB HID v1.00 Mouse [4D Mouse USB Mouse] on usb-0001:11:09.0-1.1 usb 2-1.3: new full speed USB device using ohci_hcd and address 4 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:11:09.0-1.3 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:11:09.0-1.3 ieee1394: Host added: ID:BUS[0-00:1023] GUID[003065fffe8f4c16] SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c039f7a4(lo) IPv6 over IPv4 tunneling driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel(a)redhat.com EXT3 FS on hda12, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on hda13, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda13, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on hda15, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda15, type ext3), uses xattr Adding 1023992k swap on /dev/hda14. Priority:-1 extents:1 SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts Linux Kernel Card Services options: [pci] [cardbus] [pm] ip_tables: (C) 2000-2002 Netfilter core team SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts lp: driver loaded but no devices found application mixer_applet2 uses obsolete OSS audio interface CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 usb 2-1.2: new full speed USB device using ohci_hcd and address 5 Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning Vendor: LEXAR Model: DIGITAL FILM Rev: /W1. Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 251904 512-byte hdwr sectors (129 MB) sda: Write Protect is off sda: Mode Sense: 0d 00 00 00 sda: assuming drive cache: write through SCSI device sda: 251904 512-byte hdwr sectors (129 MB) sda: Write Protect is off sda: Mode Sense: 0d 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete SELinux: initialized (dev sda1, type vfat), uses genfs_contexts _________________ SETSERIAL _________________ [root@localhost justin]# setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: unknown, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test auto_irq

3 5

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

ppc April 2005