ppc August 2021

ppc@lists.fedoraproject.org

2 participants
3 discussions

Power support for Fedora beyond IBM POWER (e.g. Libre-SOC)?
by Robert Scheck 10 Dec '21

10 Dec '21

Good evening, my interest in Power architecture got started when I read in February 2020 about the new open license model on a well-known German news ticker [1]. I attended the OpenPOWER Virtual Summit 2020 North America [2] in September and heard there the first time about Libre-SOC [3], previously also known as Libre-RISCV SoC [4] before they switched from RISC-V to Power. During FOSDEM 2021, I noticed their LibreSOC Project stand [5] and asked multiple beginner questions, which Luke Kenneth Casson Leighton (on Cc) nicely took care of (thank you!). Given an idea is a Power-based SBC [6], I wondered whether I could just run a Fedora for ppc64le (which seems to currently target POWER8 LE and later), on it. Unfortunately Luke's answer was no, because LibreSOC won't support VSX [7], which are IBM's SIMD (six hundred?) instructions, but the LibreSOC Project plans to have Simple-V Vectorisation according to their FOSDEM talk [8]. Note, the A2O POWER processor core [9] doesn't support VSX, too (same seems to apply to A2I and Microwatt, but they're either POWER7 or likely not powerful enough for typical PC usage anyway -> outside of Fedora's target?). Trying to follow the path on how to get Fedora for ppc64le to a "POWER-Pi", I had to learn that glibc developers seem to treat IBM POWER9 strictly equal to ABI rules rather handling the different features more fine granulated. My understanding here might be imprecise or wrong, this is what I understood and I'm no expert at this topic. Nevertheless I'm trying to precise it a bit more: The IBM Power ISA Version 3.1 [10] specifies on page 8 compliancy subsets, where the Linux Compliancy Subset (LCS) is explained on page 10 ff. Page 11 refers specifically to the "Scalar Float Optional Features" and mentions in the first row of the table VSX. However what seems to be implemented e.g. in glibc is something like "#ifdef POWER9" rather "#ifdef HARDWAREFEATURE", which effectively makes VSX support mandatory rather optional. Given the only publicly known modern implementor of VSX right now, not on an EOL schedule, seems to be IBM's POWER9, it would from my point of view be helpful that VSX support in at least glibc is made optional. When asking whether the new glibc-hwcaps [11] could be a solution, Luke's answer read for me like a conditional "yes", because at least VSX should be covered by glibc-hwcaps then (again, same as above...my understanding, I'm still no expert here). But this is why I'm Cc-ing here Florian Weimer, who implemented [12] this new glibc feature. I'm not sure if Florian is the right person for this topic at all, but maybe he knows the right people? :) Finally, to close the circle to the subject of my mail: (how) can we reach Power support for Fedora (and other mainstream Linux distributions) beyond IBM POWER (e.g. Libre-SOC)? [1] https://www.heise.de/newsticker/meldung/Prozessor-ISA-Power-OpenPower-Found… [2] https://openpowerfoundation.org/events/openpower-summit-2020-north-america/ [3] https://libre-soc.org/ [4] http://lists.libre-riscv.org/pipermail/libre-riscv-dev/2019-October/thread.… [5] https://stands.fosdem.org/stands/the_libresoc_project__a_hybrid_3d_cpu_vpu_… [6] https://libre-soc.org/22nm_PowerPI/ [7] https://en.wikipedia.org/wiki/AltiVec#VSX_.28Vector_Scalar_Extension.29 [8] https://fosdem.org/2021/schedule/event/the_libresoc_project_simple_v_vector… [9] https://openpowerfoundation.org/a-deep-dive-into-a2i-and-a2o/ [10] https://ibm.ent.box.com/s/hhjfw0x0lrbtyzmiaffnbxh2fuo0fog0 [11] https://sourceware.org/pipermail/libc-announce/2021/000030.html [12] https://sourceware.org/pipermail/libc-alpha/2020-June/115250.html Regards, Robert

7 15

Re: Problems with Fedora 34
by Maurizio Mileto Principale 02 Sep '21

02 Sep '21

Hi Dan, sorry for the delay in answering, yes I can tell you that the card has always worked regularly on all the Fedora that I have used up to now ie 31, 32, and 33, without any kind of problem. Similarly it works on all versions I've tried of Debian and Ubuntu without Pulse Audio. So I think so, since you switched to Pipewere see, the card has stopped working and so I'm sure the problem lies in the new Pipewere sound system ... Can you do something? I think it will be difficult to receive numerous reports as this card is very expensive and little used in general and that is why I report the anomaly because I am afraid that if it is not solved immediately, it will end up not working anymore in any distro being that all sooner or later they will pass on Pipewere ...

2 1

Problems with Fedora 34
by Maurizio Mileto 18 Aug '21

18 Aug '21

Hi Fedora Community, I am writing to you months later to let you know about a bad bug on Fedora 34 on Power. Meanwhile, I also stress to you, as certainly many have already done, that Fedora 34 on Power runs really badly, you can't look at how bad it is, with all due respect but it's terrible sorry. But the worst thing is that probably due to Pulse Audio, anyone with a sound card can no longer turn up the volume. I have a RME HDSPE-AIO and I can tell you that with Fedora 34 I no longer have the possibility to turn up the volume and therefore I have to use the integrated audio. Fedora had never had this problem, but obviously the fault lies with the new Pulse ... Can you please see what it is? Thank you

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

ppc August 2021