ppc December 2011

ppc@lists.fedoraproject.org

9 participants
9 discussions

CPU compatibility layer
by Mattia Tristo 02 May '12

02 May '12

I have wrotten a thread in Linux Forums about a CPU Layer compatibility to answer little-big endian method. I think it would be wonderful to teach the kernel to convert between the two types and ask the layer to do the translations ordering the data in memory or letting them in the original state. If the original data is from the most used format (in terms of Linux Users an lines of code written) to the same it is not converted, else if it is from the last used to the most it is converted. What do you think about this? Can be made? P.S.: There would be a lot of code and software repository that could be made in the same way!!! Best regards Mattia Tristo -- -------------------------- Hey Brother, i can't remember a reason why!!! Hey You!!! Don't be afraid!!! Tell me that You Love Yourself!!! IT: Hey Tu!!! Non essere preoccupato!!! Dimmi che ti vuoi bene e ti ami!!! ---------------------------------- "I crimini contro l'umanità li chiamano errori" (Pierangelo Bertoli) ---------------------------------------------------------- Home Page : http://sites.google.com/site/homepagedimattiatristo/ Linux USer : 523480 (http://counter.li.org/) Sprazzi di luce : http://sprazzidiluce.org

2 1

Fedora 16: can't boot ppc-DVD
by Federico Vaga 03 Jan '12

03 Jan '12

I'm trying to install Fedora 16 on a powerbook G4; on boot the system return continuously the following error: Machine check in kernel mode. Caused by (from SRR1=149030 ) Transfer error ack signal so I can't installa Fedora 16. (No problem with ppc64-DVD on an iMac G5) -- Federico Vaga

3 2

Re: Fedora 16 on Power - install problems very early in the process
by Dennis Clarke 26 Dec '11

26 Dec '11

>> > I have still some problems with my imac g5 display in X though after >> > installation. >> >> good suggestion, tried that and 25 secs into the install the system switches from output of >> messages to the console to a black screen with a blue section on the right. Then it just sits >> there. >> >> So I figure my system hardware is borked, perhaps. > > Try the Fedora 16 beta. That was what I used to install my Imac. I later > upgraded to the Fedora 16 release. The beta kernel worked with the > nomodeset kernel command line option, the release kernel does not work > with it. On the beta kernel I have not been able to get X running, it > kind of works on the release kernel, X works when started with startx. > When I boot into graphical mode, it shows the background on the 640*480 > mode and a full screen. The display settings show 2 screens, one unknown > screen. Graphical login is kind of borked: blue with red... > I wish i had some more time to p[lay around a write a decent BZ... > Louis > I'll give that a try. Or I guess I could go down a rev to Fedora 9 or 12 or whatever. Dennis -- -- http://pgp.mit.edu:11371/pks/lookup?op=vindex&search=0x1D936C72FA35B44B +-------------------------+-----------------------------------+ | Dennis Clarke | Solaris and Linux and Open Source | | dclarke(a)blastwave.org | Respect for open standards. | +-------------------------+-----------------------------------+

1 0

Re: Fedora 16 on Power - install problems very early in the process
by Dennis Clarke 26 Dec '11

26 Dec '11

> On Mon, 2011-12-26 at 01:01 -0500, Dennis Clarke wrote: >> >> Dennis >> > At the prompt which answers "linux" when you hit tab (the yaboot >> > prompt), enter >> > >> > linux text >> > >> > and try that. >> > >> >> Thanks for the help, however, same result. I end up with black on the left of the screen and >> blue >> on the right. No text .. no menus, nothing. >> >> Wish there was a headless option with a serial port. >> >> Dennis >> >> > try > linux vnc > see: > http://docs.fedoraproject.org/en-US/Fedora/16/html/Installation_Guide/VNC_W… > > I have still some problems with my imac g5 display in X though after > installation. good suggestion, tried that and 25 secs into the install the system switches from output of messages to the console to a black screen with a blue section on the right. Then it just sits there. So I figure my system hardware is borked, perhaps. I download and burn the Debian PPC64 DVD iso and try to install with that. It comes up with options for install, install64 and expert and expert64. I select expert64 and installation proceeds smoothly and all in text. No graphics to be seen. Not sure what's up with the Fedora 16 installer or my system on this dual socket dual core G5 but getting an installation going is turning out to be too much like work. Dennis

2 1

Re: Fedora 16 on Power - install problems very early in the process
by Dennis Clarke 26 Dec '11

26 Dec '11

>> Dennis > At the prompt which answers "linux" when you hit tab (the yaboot > prompt), enter > > linux text > > and try that. > Thanks for the help, however, same result. I end up with black on the left of the screen and blue on the right. No text .. no menus, nothing. Wish there was a headless option with a serial port. Dennis -- -- http://pgp.mit.edu:11371/pks/lookup?op=vindex&search=0x1D936C72FA35B44B +-------------------------+-----------------------------------+ | Dennis Clarke | Solaris and Linux and Open Source | | dclarke(a)blastwave.org | Respect for open standards. | +-------------------------+-----------------------------------+

2 1

Installing Fedora 16 Release on Intellistation 9111-285 headless...
by Link 25 Dec '11

25 Dec '11

Hih0 list, 1. Startup your Intellistation, and wait for the banner full of IBM chars. Configure the boot order to use the internal DVD drive first. 2. To access the 'Advanced System Management' WebGUI of your HMC via https:// (which is mandatory), the following SSL method must be allowed in your web browser. Under the built-in URL 'about:config' of Firefox, set: security.ssl3.rsa_rc4_40_md5;true. The standard passwords to access the WebGUI (after resetting the HMC) are: admin/admin or general/general (User/Password). 3. Depending on your current OFW state, it could be necessary to reset the NVRAM via the menu option: System Service Aids -> Factory Configuration -> Firmware. This will reset the OFW variable 'real-base' to C0000, which saves you a crash shortly after the message 'returnung from prom_init' when trying to boot from the Fedora DVD. 4. When the yaboot prompt appears, enter linux vnc vncpassword=123456789 to start. Note: Usually, the first char is sucked away, watch your typing. 5. With a GXT6500P or similar graphics board installed, we are now blind and have to tell some things to the installer in the following order: - after the screen went off (no sync), wait for the DVD to load some data for a few minutes (the DVD will be accessed 2 short times at least when finished). - enter '1' and hit return. This results in a short access to the DVD. - enter '1' and hit return again. After that the DVD loads for approx. 7 minutes, Wait for the drive to finish while the LED is on. - After 1 minute there will be a short sound from the drive. Enter '1' and press return for the last time, this will open the VNC server on remote side. 6. With the 'nmap' utility the DHCP assigned interface of port T5 will read '5901/tcp open vnc-1' and '6001/tcp open X11:1' now. Connect your VNC viewer to the IP address assigned by your DHCP server, port 5901 and password 123456789 (as told at yaboot prompt). 7. Reboot the machine via the WebGUI after the installation. Do some updates and 'write bugs'. P.S. Would be cool if someone can incorporate the GXT6500P patch from CRUX PPC to have some blazzering fast display (or display at all löl :) pP.S. here is a dmesg right after b00ting the fresh installation for the first time: [root@power ~]# dmesg [ 0.000000] Phyp-dump not supported on this hardware [ 0.000000] Allocated 1966080 bytes for 1024 pacas at c0000000073c0000 [ 0.000000] Using pSeries machine description [ 0.000000] Page orders: linear mapping = 24, virtual = 16, io = 12, vmemmap = 24 [ 0.000000] Using 1TB segments [ 0.000000] Found initrd at 0xc000000003400000:0xc000000004651c00 [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Partition configured for 2 cpus. [ 0.000000] CPU maps initialized for 2 threads per core [ 0.000000] (thread shift is 1) [ 0.000000] Freed 1900544 bytes for unused pacas [ 0.000000] Starting Linux PPC64 #1 SMP Tue Dec 20 21:24:05 UTC 2011 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x1a [ 0.000000] physicalMemorySize = 0xf5000000 [ 0.000000] htab_hash_mask = 0x7ffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.5-6.fc16.ppc64 (mockbuild(a)ppc07.qa.fedoraproject.org ) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Dec 20 21:24:05 UTC 2011 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] Node 0 Memory: 0x0-0xf5000000 [ 0.000000] PCI host bridge /pci@800000020000002 ranges: [ 0.000000] IO 0x000003fe00200000..0x000003fe002fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000040040000000..0x000004007fffffff -> 0x00000000c0000000 [ 0.000000] PCI host bridge /pci@800000020000003 ranges: [ 0.000000] IO 0x000003fe00300000..0x000003fe003fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000040080000000..0x00000400bfffffff -> 0x00000000c0000000 [ 0.000000] PCI host bridge /pci@800000020000004 ranges: [ 0.000000] IO 0x000003fe00400000..0x000003fe004fffff -> 0x0000000000000000 [ 0.000000] MEM 0x00000400c0000000..0x00000400ffffffff -> 0x00000000c0000000 [ 0.000000] EEH: PCI Enhanced I/O Error Handling Enabled [ 0.000000] PPC64 nvram contains 7168 bytes [ 0.000000] Using dedicated idle loop [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x0000f500 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000f500 [ 0.000000] On node 0 totalpages: 62720 [ 0.000000] DMA zone: 54 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 62666 pages, LIFO batch:1 [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU: Embedded 2 pages/cpu @c000000001800000 s84224 r0 d46848 u524288 [ 0.000000] pcpu-alloc: s84224 r0 d46848 u524288 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 62666 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/mapper/vg_power-lv_root ro rd.md=0 rd.dm=0 rhgb KEYTABLE=de quiet SYSFONT=True rd.luks=0 rd.lvm.lv=vg_power/lv_swap rd.lvm.lv=vg_power/lv_root LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] freeing bootmem node 0 [ 0.000000] Memory: 3942528k/4014080k available (19456k kernel code, 71552k reserved, 1984k data, 2762k bss, 6912k init) [ 0.000000] SLUB: Genslabs=19, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=256 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] pic: no ISA interrupt controller [ 0.000000] time_init: decrementer frequency = 262.400000 MHz [ 0.000000] time_init: processor frequency = 2096.901000 MHz [ 0.000000] clocksource: timebase mult[f3e706] shift[22] registered [ 0.000000] clockevent: decrementer mult[432ca57a] shift[32] cpu[0] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] allocated 2007040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000517] pid_max: default: 32768 minimum: 301 [ 0.000555] Security Framework initialized [ 0.000565] SELinux: Initializing. [ 0.000572] SELinux: Starting in permissive mode [ 0.000726] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) [ 0.002084] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) [ 0.002625] Mount-cache hash table entries: 4096 [ 0.009502] Initializing cgroup subsys cpuacct [ 0.009510] Initializing cgroup subsys memory [ 0.009619] Initializing cgroup subsys devices [ 0.009623] Initializing cgroup subsys freezer [ 0.009626] Initializing cgroup subsys net_cls [ 0.009630] Initializing cgroup subsys blkio [ 0.009635] Initializing cgroup subsys perf_event [ 0.009686] ftrace: allocating 21643 entries in 8 pages [ 0.013478] POWER5+/++ performance monitor hardware support registered [ 0.014237] Brought up 2 CPUs [ 0.014244] Node 0 CPUs: 0-1 [ 0.015324] devtmpfs: initialized [ 0.024902] atomic64 test passed [ 0.024964] NET: Registered protocol family 16 [ 0.024979] IBM eBus Device Driver [ 0.028435] PCI: Probing PCI hardware [ 0.029484] pci 0000:00:01.0: supports D1 D2 [ 0.030689] IOMMU table initialized, virtual merging enabled [ 0.038647] pci 0001:cc:01.0: supports D1 [ 0.042918] pci 0001:c8:01.0: supports D1 D2 [ 0.042922] pci 0001:c8:01.0: PME# supported from D0 D1 D2 D3hot [ 0.043059] pci 0001:c8:01.0: PME# disabled [ 0.052126] pci 0002:cc:01.0: supports D1 D2 [ 0.052130] pci 0002:cc:01.0: PME# supported from D0 D1 D2 D3hot [ 0.052272] pci 0002:cc:01.0: PME# disabled [ 0.053478] pci 0002:cc:01.1: supports D1 D2 [ 0.053482] pci 0002:cc:01.1: PME# supported from D0 D1 D2 D3hot [ 0.053628] pci 0002:cc:01.1: PME# disabled [ 0.054840] pci 0002:cc:01.2: supports D1 D2 [ 0.054843] pci 0002:cc:01.2: PME# supported from D0 D1 D2 D3hot [ 0.054984] pci 0002:cc:01.2: PME# disabled [ 0.057428] pci 0002:d0:01.0: PME# supported from D0 D3hot D3cold [ 0.057570] pci 0002:d0:01.0: PME# disabled [ 0.059513] pci 0002:d0:01.1: PME# supported from D0 D3hot D3cold [ 0.059655] pci 0002:d0:01.1: PME# disabled [ 0.064409] PCI: Probing PCI hardware done [ 0.065888] bio: create slab <bio-0> at 0 [ 0.066222] vgaarb: device added: PCI:0000:00:01.0,decodes=io +mem,owns=mem,locks=none [ 0.066247] vgaarb: loaded [ 0.066249] vgaarb: bridge control possible 0000:00:01.0 [ 0.066336] SCSI subsystem initialized [ 0.066401] libata version 3.00 loaded. [ 0.066480] usbcore: registered new interface driver usbfs [ 0.066501] usbcore: registered new interface driver hub [ 0.066548] usbcore: registered new device driver usb [ 0.066792] NetLabel: Initializing [ 0.066795] NetLabel: domain hash size = 128 [ 0.066797] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.066812] NetLabel: unlabeled traffic allowed by default [ 0.066878] Switching to clocksource timebase [ 0.073450] Switched to NOHz mode on CPU #0 [ 0.074266] Switched to NOHz mode on CPU #1 [ 0.083218] NET: Registered protocol family 2 [ 0.083263] IP route cache hash table entries: 32768 (order: 2, 262144 bytes) [ 0.083420] TCP established hash table entries: 131072 (order: 5, 2097152 bytes) [ 0.083831] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) [ 0.084056] TCP: Hash tables configured (established 131072 bind 65536) [ 0.084060] TCP reno registered [ 0.084066] UDP hash table entries: 2048 (order: 0, 65536 bytes) [ 0.084087] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) [ 0.084168] NET: Registered protocol family 1 [ 0.085475] PCI: CLS 128 bytes, default 128 [ 0.085533] Unpacking initramfs... [ 0.609657] Freeing initrd memory: 18816k freed [ 0.610105] RTAS daemon started [ 0.610894] RTAS: event: 27, Type: Platform Error, Severity: 2 [ 0.611027] vio 30000000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611077] vio 30000001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611103] vio 4000: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611125] vio 4001: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611148] vio 4002: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611171] vio 4003: Warning: IOMMU dma not supported: mask 0xffffffffffffffff, table unavailable [ 0.611544] audit: initializing netlink socket (disabled) [ 0.611561] type=2000 audit(1324787571.599:1): initialized [ 0.755756] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 0.755760] HugeTLB registered 16 GB page size, pre-allocated 0 pages [ 0.758822] VFS: Disk quotas dquot_6.5.2 [ 0.758904] Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.759620] msgmni has been set to 7736 [ 0.759729] SELinux: Registering netfilter hooks [ 0.760270] alg: No test for stdrng (krng) [ 0.760284] NET: Registered protocol family 38 [ 0.760366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.760407] io scheduler noop registered [ 0.760412] io scheduler deadline registered [ 0.760482] io scheduler cfq registered (default) [ 0.760615] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.760631] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.760757] Using unsupported 1024x768 display at 4007dfa0000, depth=8, pitch=1 [ 0.760887] Console: switching to colour frame buffer device 128x48 [ 0.811539] fb0: Open Firmware frame buffer device on / pci@800000020000002/display@1 [ 0.811663] vio_register_driver: driver hvc_console registering [ 0.812139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.908097] TX39/49 Serial driver version 1.11 [ 0.908290] Linux agpgart interface v0.103 [ 0.909506] loop: module loaded [ 0.909568] Uniform Multi-Platform E-IDE driver [ 0.909614] ide-gd driver 1.18 [ 0.909784] Fixed MDIO Bus: probed [ 0.909870] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.910147] ehci_hcd 0002:cc:01.2: EHCI Host Controller [ 0.910243] ehci_hcd 0002:cc:01.2: new USB bus registered, assigned bus number 1 [ 0.936974] ehci_hcd 0002:cc:01.2: irq 276, io mem 0x400f8002000 [ 0.956921] ehci_hcd 0002:cc:01.2: USB 2.0 started, EHCI 1.00 [ 0.956956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.956961] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.956966] usb usb1: Product: EHCI Host Controller [ 0.956969] usb usb1: Manufacturer: Linux 3.1.5-6.fc16.ppc64 ehci_hcd [ 0.956973] usb usb1: SerialNumber: 0002:cc:01.2 [ 0.957153] hub 1-0:1.0: USB hub found [ 0.957159] hub 1-0:1.0: 5 ports detected [ 0.957317] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.957500] ohci_hcd 0002:cc:01.0: OHCI Host Controller [ 0.957582] ohci_hcd 0002:cc:01.0: new USB bus registered, assigned bus number 2 [ 0.957615] ohci_hcd 0002:cc:01.0: irq 276, io mem 0x400f8001000 [ 1.046899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.046903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.046907] usb usb2: Product: OHCI Host Controller [ 1.046910] usb usb2: Manufacturer: Linux 3.1.5-6.fc16.ppc64 ohci_hcd [ 1.046914] usb usb2: SerialNumber: 0002:cc:01.0 [ 1.047071] hub 2-0:1.0: USB hub found [ 1.047080] hub 2-0:1.0: 3 ports detected [ 1.047323] ohci_hcd 0002:cc:01.1: OHCI Host Controller [ 1.047397] ohci_hcd 0002:cc:01.1: new USB bus registered, assigned bus number 3 [ 1.047426] ohci_hcd 0002:cc:01.1: irq 276, io mem 0x400f8000000 [ 1.136896] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.136903] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.136907] usb usb3: Product: OHCI Host Controller [ 1.136910] usb usb3: Manufacturer: Linux 3.1.5-6.fc16.ppc64 ohci_hcd [ 1.136914] usb usb3: SerialNumber: 0002:cc:01.1 [ 1.137072] hub 3-0:1.0: USB hub found [ 1.137080] hub 3-0:1.0: 2 ports detected [ 1.137169] uhci_hcd: USB Universal Host Controller Interface driver [ 1.137258] usbcore: registered new interface driver usbserial [ 1.137270] USB Serial support registered for generic [ 1.137288] usbcore: registered new interface driver usbserial_generic [ 1.137290] usbserial: USB Serial Driver core [ 1.137496] mousedev: PS/2 mouse device common for all mice [ 1.137731] rtc-generic rtc-generic: rtc core: registered rtc- generic as rtc0 [ 1.137890] device-mapper: uevent: version 1.0.3 [ 1.138011] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel(a)redhat.com [ 1.138360] usbcore: registered new interface driver usbhid [ 1.138363] usbhid: USB HID core driver [ 1.138430] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.138447] TCP cubic registered [ 1.138450] Initializing XFRM netlink socket [ 1.138630] NET: Registered protocol family 10 [ 1.138822] Mobile IPv6 [ 1.138826] NET: Registered protocol family 17 [ 1.138846] Registering the dns_resolver key type [ 1.138863] Running MSI bitmap self-tests ... [ 1.140627] PM: Hibernation image not present or could not be loaded. [ 1.140645] registered taskstats version 1 [ 1.140816] Call Trace: [ 1.140823] [c0000000f1943600] [c000000000017e14] .show_stack +0xb4/0x1d0 (unreliable) [ 1.140830] [c0000000f19436c0] [c00000000081791c] .dump_stack +0x28/0x3c [ 1.140836] [c0000000f1943740] [c00000000007edbc] .eeh_dn_check_failure+0x30c/0x370 [ 1.140842] [c0000000f1943800] [c00000000002ed0c] .rtas_read_config +0x15c/0x1b0 [ 1.140847] [c0000000f19438b0] [c00000000002ee1c] .rtas_pci_read_config+0xbc/0xf0 [ 1.140854] [c0000000f1943960] [c000000000425a38] .pci_bus_read_config_word+0xb8/0x120 [ 1.140860] [c0000000f1943a30] [c000000000429d58] .__pci_bus_find_cap_start+0x48/0x90 [ 1.140866] [c0000000f1943ae0] [c00000000042a2bc] .pci_find_capability+0x3c/0x90 [ 1.140872] [c0000000f1943b80] [c00000000042ad0c] .pci_dev_reset +0x2ec/0x520 [ 1.140877] [c0000000f1943c40] [c00000000042f1ec] .pci_probe_reset_function+0x2c/0x40 [ 1.140883] [c0000000f1943cd0] [c000000000435e0c] .pci_create_sysfs_dev_files+0x37c/0x4a0 [ 1.140889] [c0000000f1943d90] [c000000000c861e0] .pci_sysfs_init +0x3c/0x9c [ 1.140895] [c0000000f1943e20] [c00000000000aad0] .do_one_initcall +0x70/0x1f0 [ 1.140901] [c0000000f1943ee0] [c000000000c40c3c] .kernel_init +0x15c/0x1e8 [ 1.140907] [c0000000f1943f90] [c000000000026d58] .kernel_thread +0x54/0x70 [ 1.145195] rtc-generic rtc-generic: setting system clock to 2011-12-25 04:32:52 UTC (1324787572) [ 1.145210] Initializing network drop monitor service [ 1.145257] EEH: Detected PCI bus error on device <null> [ 1.145261] EEH: This PCI device has failed 1 times in the last hour: [ 1.145265] EEH: Bus location=U787F.001.DPM232N-P1-C4-T1 driver= pci addr=0000:00:01.0 [ 1.145270] EEH: Device location=U787F.001.DPM232N-P1-C4-T1 driver= pci addr=<null> [ 1.146466] EEH: of node=/pci@800000020000002/display@1 [ 1.146515] EEH: PCI device/vendor: 021b1014 [ 1.146563] EEH: PCI cmd/status register: 02b00146 [ 1.148317] RTAS: event: 28, Type: Platform Error, Severity: 2 [ 1.148452] Freeing unused kernel memory: 6912k freed [ 1.317570] dracut: dracut-013-20.fc16 [ 1.328206] dracut: rd.luks=0: removing cryptoluks activation [ 1.339667] udevd[96]: starting version 173 [ 1.519299] dracut: Starting plymouth daemon [ 1.576917] dracut: rd.dm=0: removing DM RAID activation [ 1.584544] dracut: rd.md=0: removing MD RAID activation [ 1.645128] pata_pdc2027x 0001:cc:01.0: version 1.0 [ 1.645281] pata_pdc2027x 0001:cc:01.0: enabling device (0002 -> 0003) [ 1.671271] ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011) [ 1.671423] ipr 0001:d0:01.0: Found IOA with IRQ: 325 [ 1.745287] pata_pdc2027x 0001:cc:01.0: PLL input clock 32750 kHz [ 1.762311] ipr 0001:d0:01.0: Starting IOA initialization sequence. [ 1.767238] ipr 0001:d0:01.0: Adapter firmware version: 0510006D [ 1.775966] scsi1 : pata_pdc2027x [ 1.776140] scsi2 : pata_pdc2027x [ 1.776219] ata1: PATA max UDMA/133 mmio m16384@0x400b8000000 cmd 0x400b80017c0 irq 324 [ 1.776226] ata2: PATA max UDMA/133 mmio m16384@0x400b8000000 cmd 0x400b80015c0 irq 324 [ 1.781532] ipr 0001:d0:01.0: IOA initialized. [ 1.781548] scsi0 : IBM 573E Storage Adapter [ 1.798634] scsi 0:0:8:0: Direct-Access IBM H0 HUS103073FL3800 RPQR PQ: 0 ANSI: 4 [ 1.805455] scsi 0:0:15:0: Enclosure IBM VSBPD4E1 U4SCSI 1203 PQ: 0 ANSI: 2 [ 1.947514] ata1.00: ATAPI: IBM DROM00205L1 H0, P533, max UDMA/66 [ 1.987398] ata1.00: configured for UDMA/66 [ 1.988584] scsi: waiting for bus probes to complete ... [ 2.044533] sd 0:0:8:0: Attached scsi generic sg0 type 0 [ 2.044843] scsi 0:0:15:0: Attached scsi generic sg1 type 13 [ 2.046032] sd 0:0:8:0: [sda] 143374000 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 2.047167] scsi 1:0:0:0: CD-ROM IBM DROM00205L1 H0 P533 PQ: 0 ANSI: 2 [ 2.048753] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.048759] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.048948] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.049055] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.065110] sd 0:0:8:0: [sda] Write Protect is off [ 2.065117] sd 0:0:8:0: [sda] Mode Sense: d3 00 10 08 [ 2.070591] sd 0:0:8:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 2.099669] sda: sda1 sda2 sda3 [ 2.127937] sd 0:0:8:0: [sda] Attached SCSI disk [ 2.162511] scsi: unknown device type 31 [ 2.162517] scsi 0:255:255:255: No Device IBM 573E001 0150 PQ: 0 ANSI: 0 [ 2.162716] scsi 0:255:255:255: Attached scsi generic sg3 type 31 [ 2.276917] usb 2-1: new full speed USB device number 2 using ohci_hcd [ 2.503929] usb 2-1: New USB device found, idVendor=05ac, idProduct=1002 [ 2.503933] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.503937] usb 2-1: Product: Hub in Apple Extended USB Keyboard [ 2.503941] usb 2-1: Manufacturer: Alps Electric [ 2.507001] hub 2-1:1.0: USB hub found [ 2.509927] hub 2-1:1.0: 3 ports detected [ 2.586184] dracut: Scanning devices sda3 for LVM logical volumes vg_power/lv_swap vg_power/lv_root [ 2.670981] dracut: inactive '/dev/vg_power/lv_swap' [5.78 GiB] inherit [ 2.671131] dracut: inactive '/dev/vg_power/lv_home' [20.69 GiB] inherit [ 2.671288] dracut: inactive '/dev/vg_power/lv_root' [41.38 GiB] inherit [ 2.808927] usb 2-1.1: new full speed USB device number 3 using ohci_hcd [ 2.933921] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=0205 [ 2.933926] usb 2-1.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.933931] usb 2-1.1: Product: Apple Extended USB Keyboard [ 2.933939] usb 2-1.1: Manufacturer: Alps Electric [ 2.943145] input: Alps Electric Apple Extended USB Keyboard as / devices/pci0002:00/0002:00:02.3/0002:cc:01.0/usb2/2-1/2-1.1/2-1.1:1.0/ input/input0 [ 2.943319] generic-usb 0003:05AC:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [Alps Electric Apple Extended USB Keyboard] on usb-0002:cc:01.0-1.1/input0 [ 2.953023] input: Alps Electric Apple Extended USB Keyboard as / devices/pci0002:00/0002:00:02.3/0002:cc:01.0/usb2/2-1/2-1.1/2-1.1:1.1/ input/input1 [ 2.953160] generic-usb 0003:05AC:0205.0002: input,hidraw1: USB HID v1.10 Device [Alps Electric Apple Extended USB Keyboard] on usb-0002:cc:01.0-1.1/input1 [ 3.037673] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 3.037678] EXT4-fs (dm-1): write access will be enabled during recovery [ 3.038924] usb 2-1.3: new low speed USB device number 4 using ohci_hcd [ 3.165920] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c046 [ 3.165926] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.165930] usb 2-1.3: Product: USB Optical Mouse [ 3.165935] usb 2-1.3: Manufacturer: Logitech [ 3.177077] input: Logitech USB Optical Mouse as /devices/ pci0002:00/0002:00:02.3/0002:cc:01.0/usb2/2-1/2-1.3/2-1.3:1.0/input/ input2 [ 3.177279] generic-usb 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0002:cc:01.0-1.3/input0 [ 3.217002] EEH: bus reset 1 failed on slot /pci@800000020000002/ display@1, rc=2 [ 4.276114] EXT4-fs (dm-1): orphan cleanup on readonly fs [ 4.276124] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 393218 [ 4.276199] EXT4-fs (dm-1): 1 orphan inode deleted [ 4.276203] EXT4-fs (dm-1): recovery complete [ 4.329430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.421604] dracut: Checking ext4: /dev/mapper/vg_power-lv_root [ 4.421674] dracut: issuing e2fsck -a /dev/mapper/vg_power-lv_root [ 4.475101] dracut: /dev/mapper/vg_power-lv_root: clean, 124045/2711552 files, 1078520/10846208 blocks [ 4.475313] dracut: Remounting /dev/mapper/vg_power-lv_root with -o ro [ 4.509272] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.521722] dracut: Mounted root filesystem /dev/mapper/vg_power- lv_root [ 4.872324] dracut: Switching root [ 5.287000] EEH: bus reset 2 failed on slot /pci@800000020000002/ display@1, rc=2 [ 5.329827] type=1404 audit(1324787576.679:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 5.487975] SELinux: 2048 avtab hash slots, 97124 rules. [ 5.516335] SELinux: 2048 avtab hash slots, 97124 rules. [ 5.624496] SELinux: 9 users, 13 roles, 3910 types, 208 bools, 1 sens, 1024 cats [ 5.624501] SELinux: 82 classes, 97124 rules [ 5.631460] SELinux: Completing initialization. [ 5.631463] SELinux: Setting up existing superblocks. [ 5.631474] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.631481] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 5.632406] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 5.632414] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 5.632426] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.632439] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 5.633328] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 5.633335] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 5.635837] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 5.635846] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 5.635853] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 5.635870] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.635880] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 5.635889] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 5.635927] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 5.635939] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.636818] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.636825] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.641262] SELinux: initialized (dev dm-1, type ext4), uses xattr [ 5.649646] type=1403 audit(1324787576.999:3): policy loaded auid=4294967295 ses=4294967295 [ 5.664153] systemd[1]: Successfully loaded SELinux policy in 372ms 257us. [ 5.726056] systemd[1]: Successfully loaded SELinux database in 61ms 528us, size on heap is 477K. [ 5.754047] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.755960] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.827599] systemd[1]: Relabelled /dev and /run in 71ms 511us. [ 5.843193] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.896945] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.936979] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.966971] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.016947] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.041360] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.086971] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.116964] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 6.117109] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 6.149338] systemd[1]: Set hostname to <power.charge.homeunix.net>. [ 7.219547] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 7.357016] EEH: bus reset 3 failed on slot /pci@800000020000002/ display@1, rc=2 [ 7.357020] EEH: Unable to reset, rc=-1 [ 7.357024] EEH: Unable to recover from failure of PCI device at location=U787F.001.DPM232N-P1-C4-T1 driver= pci addr=<null> [ 7.357027] Please try reseating this device or replacing it. [ 7.358149] EEH: of node=/pci@800000020000002/display@1 [ 7.358198] EEH: PCI device/vendor: 021b1014 [ 7.358247] EEH: PCI cmd/status register: 02b00140 [ 7.358249] EEH: no PCI device for this of node [ 7.359487] RTAS: event: 29, Type: Platform Error, Severity: 2 [ 7.486564] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.568825] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 7.649016] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 8.116929] RPC: Registered named UNIX socket transport module. [ 8.116934] RPC: Registered udp transport module. [ 8.116937] RPC: Registered tcp transport module. [ 8.116940] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.117164] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 8.296491] udevd[406]: starting version 173 [ 8.817688] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 8.878814] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 9.109206] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 9.109211] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 9.109403] e1000 0002:d0:01.0: enabling device (0000 -> 0002) [ 9.218073] ttyn0 at MMIO 0x0 (irq = 275) is a jsm [ 9.446851] e1000 0002:d0:01.0: eth0: (PCI-X:133MHz:64-bit) 00:14:5e:96:c6:ea [ 9.446865] e1000 0002:d0:01.0: eth0: Intel(R) PRO/1000 Network Connection [ 9.447081] e1000 0002:d0:01.1: enabling device (0000 -> 0002) [ 9.447419] jsm: Port 0 added [ 9.447425] ttyn1 at MMIO 0x0 (irq = 275) is a jsm [ 9.518172] jsm: Port 1 added [ 9.518178] jsm 0002:c8:01.0: board 1: Digi Neo (rev 2), irq 275 [ 9.787194] e1000 0002:d0:01.1: eth1: (PCI-X:133MHz:64-bit) 00:14:5e:96:c6:eb [ 9.787203] e1000 0002:d0:01.1: eth1: Intel(R) PRO/1000 Network Connection [ 10.019571] scsi 0:0:15:0: Resetting device [ 10.265177] ses 0:0:15:0: Attached Enclosure device [ 10.344722] systemd-vconsole-setup[476]: Cannot open font file True [ 10.618435] mtp-probe[507]: checking bus 2, device 3: "/sys/devices/ pci0002:00/0002:00:02.3/0002:cc:01.0/usb2/2-1/2-1.1" [ 10.618655] mtp-probe[506]: checking bus 2, device 4: "/sys/devices/ pci0002:00/0002:00:02.3/0002:cc:01.0/usb2/2-1/2-1.3" [ 10.636764] systemd-vconsole-setup[476]: /bin/setfont failed with error code 66. [ 10.703699] Adding 6062016k swap on /dev/mapper/vg_power-lv_swap. Priority:0 extents:1 across:6062016k [ 10.798412] mtp-probe[506]: bus: 2, device: 4 was not an MTP device [ 10.798426] mtp-probe[507]: bus: 2, device: 3 was not an MTP device [ 10.917023] snd_cs4281 0001:c8:01.0: Refused to change power state, currently in D1 [ 11.119482] systemd-fsck[598]: /dev/sda2: recovering journal [ 11.244167] systemd-fsck[598]: /dev/sda2: clean, 21/128016 files, 70608/512000 blocks [ 11.311694] rmmod[609]: ERROR: Module scsi_wait_scan does not exist in /proc/modules [ 11.566997] gameport gameport0: CS4281 Gameport is pci0001:c8:01.0/ gameport0, speed 810kHz [ 11.802218] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 11.821825] SELinux: initialized (dev sda2, type ext4), uses xattr [ 12.548237] fedora-storage-init[634]: Setting up Logical Volume Management: 3 logical volume(s) in volume group "vg_power" now active [ 12.674497] fedora-storage-init[634]: [ OK ] [ 12.800742] systemd-fsck[650]: /dev/mapper/vg_power-lv_home: recovering journal [ 12.906807] systemd-fsck[650]: /dev/mapper/vg_power-lv_home: clean, 11/1357216 files, 129207/5423104 blocks [ 13.158111] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 13.158126] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 13.362556] fedora-storage-init[655]: Setting up Logical Volume Management: 3 logical volume(s) in volume group "vg_power" now active [ 13.377223] fedora-storage-init[655]: [ OK ] [ 13.746098] lvm[675]: 3 logical volume(s) in volume group "vg_power" monitored [ 14.229775] systemd-tmpfiles[681]: Successfully loaded SELinux database in 24ms 212us, size on heap is 479K. [ 14.781350] alsactl[683]: /sbin/alsactl: load_state:1586: Cannot open /var/lib/alsa/asound.state for reading: No such file or directory [ 14.830395] alsactl[683]: Found hardware: "CS4281" "Cirrus Logic CS4299 rev 4" "AC97a:43525934" "0x0143" "0x1804" [ 14.830410] alsactl[683]: Hardware is initialized using a generic method [ 15.322594] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 15.353573] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 15.392603] iptables.init[695]: iptables: Applying firewall rules: [ OK ] [ 15.446338] auditctl[722]: No rules [ 15.446351] auditctl[722]: AUDIT_STATUS: enabled=0 flag=1 pid=0 rate_limit=0 backlog_limit=320 lost=0 backlog=0 [ 15.456077] auditd[710]: Started dispatcher: /sbin/audispd pid: 735 [ 15.516198] audispd[735]: priority_boost_parser called with: 4 [ 15.516212] audispd[735]: max_restarts_parser called with: 10 [ 15.534317] audispd[735]: audispd initialized with q_depth=120 and 1 active plugins [ 15.558627] auditd[710]: Init complete, auditd 2.1.3 listening for events (startup state enable) [ 15.641603] ip6tables.init[688]: ip6tables: Applying firewall rules: [ OK ] [ 16.457875] NetworkManager[747]: NetworkManager[747]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... [ 16.457892] NetworkManager[747]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... [ 16.457906] NetworkManager[747]: NetworkManager[747]: <info> Read config file /etc/NetworkManager/NetworkManager.conf [ 16.457920] NetworkManager[747]: <info> Read config file /etc/ NetworkManager/NetworkManager.conf [ 16.678795] avahi-daemon[766]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). [ 16.679008] avahi-daemon[766]: Successfully dropped root privileges. [ 16.679794] avahi-daemon[766]: avahi-daemon 0.6.30 starting up. [ 16.702163] avahi-daemon[766]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! [ 17.065033] sshd-keygen[752]: Generating SSH2 RSA host key: [ OK ] [ 18.035051] sshd-keygen[752]: Generating SSH1 RSA host key: [ OK ] [ 18.504970] dbus[784]: avc: netlink poll: error 4 [ 18.504982] dbus[784]: avc: netlink poll: error 4 [ 18.504994] dbus-daemon[784]: dbus[784]: avc: netlink poll: error 4 [ 18.505005] dbus-daemon[784]: dbus[784]: avc: netlink poll: error 4 [ 18.523280] abrtd[729]: Init complete, entering main loop [ 18.525089] dbus[784]: [system] Activating systemd to hand-off: service name='org.freedesktop.NetworkManager' unit='dbus- org.freedesktop.NetworkManager.service' [ 18.525238] dbus-daemon[784]: dbus[784]: [system] Activating systemd to hand-off: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service' [ 18.525855] avahi-daemon[766]: Successfully called chroot(). [ 18.525867] avahi-daemon[766]: Successfully dropped remaining capabilities. [ 18.527966] systemd-logind[771]: New seat seat0. [ 18.534317] dbus[784]: [system] Successfully activated service 'org.freedesktop.systemd1' [ 18.534330] dbus-daemon[784]: dbus[784]: [system] Successfully activated service 'org.freedesktop.systemd1' [ 18.553393] avahi-daemon[766]: Loading service file /services/ ssh.service. [ 18.569232] avahi-daemon[766]: Loading service file /services/ udisks.service. [ 18.598807] sshd-keygen[752]: Generating SSH2 DSA host key: [ OK ] [ 18.606053] avahi-daemon[766]: Network interface enumeration completed. [ 18.606066] avahi-daemon[766]: Registering HINFO record with values 'PPC64'/'LINUX'. [ 18.606078] avahi-daemon[766]: Server startup complete. Host name is power.local. Local service cookie is 239314884. [ 18.606090] avahi-daemon[766]: Service "power" (/services/ udisks.service) successfully established. [ 18.606102] avahi-daemon[766]: Service "power" (/services/ ssh.service) successfully established. [ 18.728015] /usr/sbin/crond[783]: (CRON) INFO (running with inotify support) [ 19.380854] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.384562] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 19.387286] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 19.387705] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.826906] eth0: no IPv6 routers present [root@power ~]# somewhat cool an vintage iron! well done... Cheers Link

1 0

Fedora 16 on Power - install problems very early in the process
by Dennis Clarke 25 Dec '11

25 Dec '11

Yay .. Merry Christmas > We managed to squash almost all of the few remaining issues we've had > after Beta and have documented workarounds for the remaining issue we > still have in the release notes text which can be found here: > > https://fedoraproject.org/wiki/Fedora_16_PPC_release_notes Not too sure which list to write to so I will hit them both, first person to tell me "don't crosspost" wins :-) So I bought a Mac G5 just to run this and when I hit "c" at POST power on time I do get the yaboot prompt. So I hit enter and a pile of goodness starts to happen. All of that is text and that is good. Then I see a screen which is half black on the left and blue on the right and nothing else. No text anywhere. Nothing. I figure that for some obscure reason my G5 wants to display the center of the screen way the heck off to the right. However no amount of adjustment of my monitor will help here. I check the release notes and note this thing : https://bugzilla.redhat.com/show_bug.cgi?id=766862 I don't think that is what is happening here. Is there a pure text installer ? An option I can give to yaboot to go with pure text just so I can get the OS installed and network setup and then I can fiddle with Xorg later ? Dennis

2 1

Announcement: Release of Fedora 16 on Power
by Phil Knirsch 23 Dec '11

23 Dec '11

Hi everyone! As a holiday present the Fedora Secondary Arch team for Power is proud to announce the release of Fedora 16 on Power. Grab it while it's fresh from here: https://mirrors.fedoraproject.org/publiclist/Fedora/16/ppc64/ under releases/16/Fedora/ppc64 or directly from http://dl.fedoraproject.org/pub/fedora-secondary/releases/16/Fedora/ppc64 We managed to squash almost all of the few remaining issues we've had after Beta and have documented workarounds for the remaining issue we still have in the release notes text which can be found here: https://fedoraproject.org/wiki/Fedora_16_PPC_release_notes The most noticeable ones are the fixes to the radeon and the mga drivers to work a lot better out of the box on Power now, see: 746410 [MGA_CARD_TYPE_G550] Add /lib/firmware/matrox/g400_warp.fw into initramfs 766862 Power Mac G5 locks at boot (radeon.agpmode=-1 fixes it) Over the last months the team as well as the package maintainers put it a fantastic effort to get everything into shape to get us to this point where we can declare this to be a release. We'd also like to thank everyone who has been willing to test our Alpha and Beta versions and give us great feedback and helped to make this a pretty solid release. It's probably not perfect, but in the light of it being the first release since Fedora 12 we're pretty happy with how it turned out in the end. We'll also be releasing updates via the normal means in regular intervals, just like on the primary arch, so working with Fedora 16 on Power should give you the same experience as on Intel platforms. For Fedora-17 we're aiming to flash out the last few minor issues we've seen lurking around and to make sure we're as close as possible to primary arch from a package build state. With all that being said i'd like to wish everyone happy holidays and a happy new year from me and the whole Fedora Secondary Arch team for Power. See you next year! Thanks & regards, Phil -- Philipp Knirsch | Tel.: +49-711-96437-470 Supervisor Core Services | Fax.: +49-711-96437-111 Red Hat GmbH | Email: Phil Knirsch <pknirsch(a)redhat.com> Hauptstaetterstr. 58 | Web: http://www.redhat.com/ D-70178 Stuttgart, Germany

3 2

Fedora 16 Beta on Power ready for testing!
by Phil Knirsch 09 Dec '11

09 Dec '11

Long time in the making, but at long last after 6 weeks of hard work the Fedora Secondary Arch Team for Power finally managed to get the Fedora 16 Beta release done! Available from mirrors now here: https://mirrors.fedoraproject.org/publiclist/Fedora/16/ppc64/ under releases/test/16-Beta/ or directly from here: http://download.fedoraproject.org/pub/fedora-secondary/releases/test/16-Bet… A lot of the issues we still had for Alpha have been fixed since then. The most noticeable ones are: * Firefox-8 works now on 32bit and 64bit out of the box * Gnome3 Desktop no more segfaulting * Qt4 not segfaulting all of KDE anymore * Various anaconda issues (serial console, garbled fonts to name a few) * Filesystem encryption password check working now * Numerous rebuild failures More details about this Beta release can be found here: https://fedoraproject.org/wiki/Fedora_16_Beta_PPC_release_notes and we do have an official release announcement as well here: https://fedoraproject.org/wiki/F16_Beta_PPC_release_announcement I want to thank everyone involved in making this happen, it's been a pretty long stretch with quite a few hurdles, but we finally got the first big milestone done towards the goal to get a Fedora 16 on Power out. We're working full steam now to get GA done by 21. of December. As usual, the whole team can typically be found on the #fedora-ppc IRC channel on FreeNode and via our email list: https://admin.fedoraproject.org/mailman/listinfo/ppc And we have our Secondary Arch wiki with (decently) updated information: http://fedoraproject.org/wiki/Architectures/PowerPC Thanks & regards, Phil -- Philipp Knirsch | Tel.: +49-711-96437-470 Supervisor Core Services | Fax.: +49-711-96437-111 Red Hat GmbH | Email: Phil Knirsch <pknirsch(a)redhat.com> Hauptstaetterstr. 58 | Web: http://www.redhat.com/ D-70178 Stuttgart, Germany

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

ppc December 2011