Hopefully I did something wrong, but it's not working at all for me on the beaglebone black:
Here is what I get when I try to boot from eMMC:
U-Boot SPL 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04) omap_hsmmc_send_cmd: timedout waiting on cmd inhibit to clear spl: mmc init failed: err - -19 ### ERROR ### Please RESET the board ###
Here is what I get when I make a new SD card from the latest minimal image:
U-Boot 2014.10-gc4b8756-dirty (Oct 15 2014 - 08:57:04)
Watchdog enabled I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Error - No Valid Environment Area found *** Warning - bad CRC, using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Card did not respond to voltage select! Booting from nand ...
no devices available
no devices available Bad Linux ARM zImage magic!
When I am in the uboot command processor, I cannot select the internal eMMC at all:
U-Boot# mmc dev 1 Card did not respond to voltage select!
Previously, I was booting with no problems from either eMMC or SD with F21.
Thanks,
Adam
On Wed, Oct 15, 2014 at 6:34 AM, Peter Robinson pbrobinson@gmail.com wrote:
Hi All,
Just a heads up that the u-boot 2014.10 GA is on it's way to Fedora 21.
https://admin.fedoraproject.org/updates/uboot-tools-2014.10-1.fc21
This release contains numerous fixes and improvements over the currently shipping release including, but by no means limited to:
- Upstream generic distro support (huge thanks to Dennis Gilmore and
Steven Warren for their tireless work to get this upstream
- AllWinner suppport for A10*/A13/A20 devices (huge thanks to Hans for
this tireless work on this)
- Numerous other improvements too long to name.
New devices that we now enable in this release, in no particular order, include:
AllWinner: A10-OLinuXino-Lime A10s-OLinuXino-M A13-OLinuXino A13-OLinuXinoM A20-OLinuXino_MICRO Bananapi Cubieboard Cubieboard2 Cubietruck Mele_A1000 Mele_A1000G Mini-X Mini-X-1Gb
Tegra: jetson-tk1
i.MX6 cm_fx6 (Utilite) riotboard
It's not yet in nightly builds but I'm going to request it for the next Beta TC compose.
Known issues:
- Panda is not yet ported to generic distro support
Please test and provide feedback.
Peter _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm