desktop March 2005

desktop@lists.fedoraproject.org

41 participants
22 discussions

X crashes when using a new monitor
by Benjamin Jiang 14 Mar '05

14 Mar '05

Hi, all, I installed a fresh copy of FC3 into my Dad's machine and everything worked fine. However, when I brought the machine to my Dad's place and plugged in his monitor (Acer 7154e), X crashes no matter what. I tried config xorg.conf with the correct HorizSync and VertRefresh, but it didn't even make any difference. Then I tried the extreme solution: I replaced the HDD with a new HDD and installed a fresh copy FC3 with my Dad's monitor plugged in while installation. Everything worked fine again and I got graphics interface. I then grabbed the working xorg.conf and swapped the HDDs. After I booted into the previous installed FC3, I replaced the xorg.conf with the working xorg.conf. It still didn't make any difference! I am a little confused. Is there some other file I need to change except for /etc/X11/xorg.conf? Is there any special module I need to load? I know I could just re-install FC3 into my Dad's HDD. I am just curious to see what's wrong here. Here's the setup: AMD K6 350Mhz; 196MB RAM Trident Blade3D 8MB video card Thanks in advance! Ben. Here comes the log file: /var/log/Xorg.0.log: --------------------------------------------------------------------------------- X Window System Version 6.8.1 Release Date: 17 September 2004 X Protocol Version 11, Revision 0, Release 6.8.1 Build Operating System: Linux 2.4.21-14.ELsmp i686 [ELF] Current Operating System: Linux fallsview 2.6.9-1.667 #1 Tue Nov 2 14:41:31 EST 2004 i586 Build Date: 20 October 2004 Build Host: tweety.build.redhat.com Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9-1.667 (bhcompile(a)tweety.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Tue Nov 2 14:41:31 EST 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 1 02:56:07 2000 (++) Using config file: "xorg.conf.new" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (--) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,0598 card 0000,0000 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 22 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00 (II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00 (II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00 (II) PCI: 00:08:0: chip 122d,50dc card 122d,8000 rev 10 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 10d9,0531 card 15e8,8110 rev 25 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1023,9880 card 1023,9880 rev 3a class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xd4000000 - 0xd7ffffff (0x4000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Host-to-PCI bridge: (II) Bus -1: bridge is at (0:7:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus -1 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus -1 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(1:0:0) Trident Microsystems Blade 3D PCI/AGP rev 58, Mem @ 0xd5800000/23, 0xd6000000/17, 0xd5000000/23 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff (II) Active PCI resource ranges: [0] -1 0 0xd9000000 - 0xd90000ff (0x100) MX[B] [1] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [2] -1 0 0xd5000000 - 0xd57fffff (0x800000) MX[B](B) [3] -1 0 0xd6000000 - 0xd601ffff (0x20000) MX[B](B) [4] -1 0 0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) [5] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [6] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [7] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [8] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B] [9] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [10] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B] [11] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [12] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [13] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xd9000000 - 0xd90000ff (0x100) MX[B] [1] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [2] -1 0 0xd5000000 - 0xd57fffff (0x800000) MX[B](B) [3] -1 0 0xd6000000 - 0xd601ffff (0x20000) MX[B](B) [4] -1 0 0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) [5] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [6] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [7] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [8] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B] [9] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [10] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B] [11] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [12] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [13] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xd9000000 - 0xd90000ff (0x100) MX[B] [6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [7] -1 0 0xd5000000 - 0xd57fffff (0x800000) MX[B](B) [8] -1 0 0xd6000000 - 0xd601ffff (0x20000) MX[B](B) [9] -1 0 0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [14] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [15] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B] [16] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [17] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B] [18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [19] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [20] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.0.2 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "trident" (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o (II) Module trident: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c, tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset blade3d found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xd9000000 - 0xd90000ff (0x100) MX[B] [6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [7] -1 0 0xd5000000 - 0xd57fffff (0x800000) MX[B](B) [8] -1 0 0xd6000000 - 0xd601ffff (0x20000) MX[B](B) [9] -1 0 0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [13] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [14] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [15] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B] [16] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [17] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B] [18] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [19] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [20] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xd9000000 - 0xd90000ff (0x100) MX[B] [6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O [7] -1 0 0xd5000000 - 0xd57fffff (0x800000) MX[B](B) [8] -1 0 0xd6000000 - 0xd601ffff (0x20000) MX[B](B) [9] -1 0 0xd5800000 - 0xd5ffffff (0x800000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B] [16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B] [17] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [18] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B] [19] -1 0 0x0000d000 - 0x0000d007 (0x8) IX[B] [20] -1 0 0x0000cc00 - 0x0000cc7f (0x80) IX[B] [21] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B] [22] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B] [23] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.8.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (==) TRIDENT(0): RGB weight 565 (==) TRIDENT(0): Default visual is TrueColor (==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0) (==) TRIDENT(0): Linear framebuffer at 0xD5800000 (--) TRIDENT(0): IO registers at 0xD6000000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) TRIDENT(0): initializing int10 (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 (II) TRIDENT(0): VESA BIOS detected (II) TRIDENT(0): VESA VBE Version 2.0 (II) TRIDENT(0): VESA VBE Total Mem: 8192 kB (II) TRIDENT(0): VESA VBE OEM: Trident Blade 3D (II) TRIDENT(0): VESA VBE OEM Software Rev: 2.0 (II) TRIDENT(0): VESA VBE OEM Vendor: TRIDENT MICROSYSTEMS INC. (II) TRIDENT(0): VESA VBE OEM Product: Blade 3D (II) TRIDENT(0): VESA VBE OEM Product Rev: J 6.4 (38) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) TRIDENT(0): VESA VBE DDC supported (II) TRIDENT(0): VESA VBE DDC Level 2 (II) TRIDENT(0): VESA VBE DDC transfer in appr. 1 sec. (II) TRIDENT(0): VESA VBE DDC read successfully (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) TRIDENT(0): Manufacturer: API Model: 4536 Serial#: 924 (II) TRIDENT(0): Year: 1997 Week: 26 (II) TRIDENT(0): EDID Version: 1.2 (II) TRIDENT(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) TRIDENT(0): Sync: Separate (II) TRIDENT(0): Max H-Image Size [cm]: horiz.: 27 vert.: 20 (II) TRIDENT(0): Gamma: 2.66 (II) TRIDENT(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) TRIDENT(0): redX: 0.625 redY: 0.340 greenX: 0.284 greenY: 0.600 (II) TRIDENT(0): blueX: 0.149 blueY: 0.064 whiteX: 0.280 whiteY: 0.311 (II) TRIDENT(0): Supported VESA Video Modes: (II) TRIDENT(0): 720x400@70Hz (II) TRIDENT(0): 640x480@60Hz (II) TRIDENT(0): 640x480@72Hz (II) TRIDENT(0): 640x480@75Hz (II) TRIDENT(0): 800x600@60Hz (II) TRIDENT(0): 800x600@72Hz (II) TRIDENT(0): 800x600@75Hz (II) TRIDENT(0): 1024x768@60Hz (II) TRIDENT(0): Manufacturer's mask: 21 (--) TRIDENT(0): Revision is 58 (--) TRIDENT(0): Found Blade3D chip (--) TRIDENT(0): RAM type is SDRAM (--) TRIDENT(0): Using HW cursor (--) TRIDENT(0): VideoRAM: 8192 kByte (--) TRIDENT(0): Memory Clock is 109.77 MHz (==) TRIDENT(0): Min pixel clock is 12 MHz (--) TRIDENT(0): Max pixel clock is 230 MHz (II) TRIDENT(0): Monitor0: Using hsync range of 31.00-60.00 kHz (II) TRIDENT(0): Monitor0: Using vrefresh range of 55.00-90.00 Hz (II) TRIDENT(0): Clock range: 12.00 to 230.00 MHz (II) TRIDENT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1152x864" (hsync out of range) (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (hsync out of range) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of range) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of range) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (hsync out of range) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (hsync out of range) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (hsync out of range) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1152x864" (hsync out of range) (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of range) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of range) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of range) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (hsync out of range) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1024" (hsync out of range) (II) TRIDENT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1200" (hsync out of range) (II) TRIDENT(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "1152x768" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "1024x768" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "1024x768" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "1024x768" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "1024x768" (width too large for virtual size) (II) TRIDENT(0): Not using default mode "832x624" (width too large for virtual size) (--) TRIDENT(0): Virtual size is 800x600 (pitch 800) (**) TRIDENT(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) TRIDENT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) TRIDENT(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) TRIDENT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) TRIDENT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) TRIDENT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) TRIDENT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) TRIDENT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) TRIDENT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) TRIDENT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) TRIDENT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) TRIDENT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) TRIDENT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) TRIDENT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) TRIDENT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) TRIDENT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) TRIDENT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) TRIDENT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) TRIDENT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) TRIDENT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) TRIDENT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) TRIDENT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) TRIDENT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) TRIDENT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) TRIDENT(0): Display dimensions: (270, 200) mm (**) TRIDENT(0): DPI set to (75, 76) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.8.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 *** If unresolved symbols were reported above, they might not *** be the reason for the server aborting. Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.X.Org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.

5 11

FC3 annoyances (blanking and blanking)
by Ofer Nave 14 Mar '05

14 Mar '05

Hello! I'm new to Fedora... just installed FC3. There are two annoyances that I haven't found a way around, and I was hoping to get help here. 1) I can't find a way to stop the screen from blanking after a while. I tried the screensaver settings, the power settings, and xset s off... nothing has worked so far. 2) I used to use SecureCRT to ssh into linux boxes for development, and when I used man or less, the last screen would remain visible after pressing 'q' to return to the prompt. Now that I'm using X, it disappears when I quit. I've tried xterm, konsole, and gnome term - all have the same behavior. Thanks! -ofer

5 6

RE: Being denied my own files!
by marc.miller＠amd.com 13 Mar '05

13 Mar '05

In order to delete the file, you must: * have write access to the file * have write access to the directory * the sTicky bit (chmod +t) must not be set on the directory (sTicky is rare) -----Original Message----- From: fedora-desktop-list-bounces(a)redhat.com [mailto:fedora-desktop-list-bounces@redhat.com] On Behalf Of Dotan Cohen Sent: Thursday, March 10, 2005 5:09 PM To: fedora-desktop-list(a)redhat.com Subject: Being denied my own files! When trying to delete a file in my /home/dotancohen directory (and logged in as dotancohen) I get: Access denied to /home/dotancohen/ankush.jpg. In rightClick-> Properties-> Permissions I saw that Owner can read and write, Group can read, and Others can read. So I changed the permissions so that all the groups say read & write, but still I cannot delete the file. No other application is accessing the file. I'm using Konqueror in KDE on FC3. Thanks in advance. Dotan Cohen http://English-Lyrics.com http://Song-Lyriks.com -- Fedora-desktop-list mailing list Fedora-desktop-list(a)redhat.com http://www.redhat.com/mailman/listinfo/fedora-desktop-list

4 5

RE: FC2 grub defaults to oldest kernel
by Matthew Page 11 Mar '05

11 Mar '05

That all depends... If the kernel you want to run is listed first, then the answer to your question is yes. > -----Original Message----- > From: fedora-desktop-list-bounces(a)redhat.com [mailto:fedora-desktop-list- > bounces(a)redhat.com] On Behalf Of beartooth > Sent: Thursday, March 10, 2005 11:15 AM > To: fedora-desktop-list(a)redhat.com > Subject: Re: FC2 grub defaults to oldest kernel > > On Wed, 09 Mar 2005 18:07:26 +0100, Nils Breunese wrote: > > >> > If you don't mind a little file editing, you can change the default > in > >> > your /etc/grub.conf > >> > >> OK, the first line not commented out says "default=2" Does that mean it > >> will always be the second one down the list of however many, or > something > >> else? Can I simply change the 2 to a 1? > > > > It means it will always be the third down the list of however many. The > > count starts at 0. > > Aha. I couldn't tell whether it was a sneakin' hunch or a faint memory, > but I had a distinct intimation of some sort of lurking gotcha there > somewhere. So if I want FC2 to behave as I'm accustomed to things redhat > doing, I should just change the 2 to a zero -- right? That's it? > > -- > Beartooth Implacable, Linux Evangelist & Gadfly > neo-redneck, curmudgeonly codger with FC1&2, YDL4 > Pine 4.62, Pan 0.14.2; Privoxy 3.0.1; Opera 7.54, Firefox 1.0 > Bear in mind that I have little idea what I am talking about. > > > -- > Fedora-desktop-list mailing list > Fedora-desktop-list(a)redhat.com > http://www.redhat.com/mailman/listinfo/fedora-desktop-list > > > BEGIN-ANTISPAM-VOTING-LINKS > ------------------------------------------------------ > Teach CanIt if this mail (ID 1945175) is spam: > Spam: > http://canit.ciri.com/canit/b.php?c=s&i=1945175&m=f59a2571da95 > Not spam: > http://canit.ciri.com/canit/b.php?c=n&i=1945175&m=f59a2571da95 > Forget vote: > http://canit.ciri.com/canit/b.php?c=f&i=1945175&m=f59a2571da95 > ------------------------------------------------------ > END-ANTISPAM-VOTING-LINKS

2 1

Being denied my own files!
by Dotan Cohen 11 Mar '05

11 Mar '05

When trying to delete a file in my /home/dotancohen directory (and logged in as dotancohen) I get: Access denied to /home/dotancohen/ankush.jpg. In rightClick-> Properties-> Permissions I saw that Owner can read and write, Group can read, and Others can read. So I changed the permissions so that all the groups say read & write, but still I cannot delete the file. No other application is accessing the file. I'm using Konqueror in KDE on FC3. Thanks in advance. Dotan Cohen http://English-Lyrics.com http://Song-Lyriks.com

2 1

startup screen with keyboard.
by Dotan Cohen 10 Mar '05

10 Mar '05

Hi all, I sometimes have problems when I switch computers on my KVM: the mouse stops working in Fedora when I switch back to Fedora. A reset fixes it- so I know that the KVM and the cables are ok. How can I 'restart' the mouse without rebooting? Thanks! Dotan Cohen http://English-Lyrics.com http://Song-Lyriks.com

3 2

RE: FC2 grub defaults to oldest kernel
by Matthew Page 10 Mar '05

10 Mar '05

If you don't mind a little file editing, you can change the default in your /etc/grub.conf > -----Original Message----- > From: fedora-desktop-list-bounces(a)redhat.com [mailto:fedora-desktop-list- > bounces(a)redhat.com] On Behalf Of beartooth > Sent: Tuesday, March 08, 2005 11:14 AM > To: fedora-desktop-list(a)redhat.com > Subject: Re: FC2 grub defaults to oldest kernel > > On Tue, 08 Mar 2005 12:07:52 -0500, Matthew Miller wrote: > > > On Tue, Mar 08, 2005 at 11:19:31AM -0500, beartooth wrote: > >> My past experience has been that grub automatically makes each new > kernel > >> the default boot; but on my FC2 machine the default is the oldest one. > Is > >> there a reason for this? Or should I fix it? And if so, how? > > > > This is addressed in FC3 -- look at /etc/sysconfig/kernel. > > I tried FC3, weeks ago -- and didn't like it. Iirc that tale of woe was > here; anyway, I'm not about to try again for another year or two. And > during that time I'll stick to FC2 -- if not go back to FC1. So what > should I do with FC2?? > > -- > Beartooth Implacable, Linux Evangelist & Gadfly > neo-redneck, curmudgeonly codger with FC1 & YDL 4.0 > Pine 4.61, Pan 0.14.2; Privoxy 3.0.1; Opera 7.54, Firefox 1.0 > Bear in mind that I have little idea what I am talking about. > > > -- > Fedora-desktop-list mailing list > Fedora-desktop-list(a)redhat.com > http://www.redhat.com/mailman/listinfo/fedora-desktop-list > > > BEGIN-ANTISPAM-VOTING-LINKS > ------------------------------------------------------ > Teach CanIt if this mail (ID 1934675) is spam: > Spam: > http://canit.ciri.com/canit/b.php?c=s&i=1934675&m=172ba00e46ce > Not spam: > http://canit.ciri.com/canit/b.php?c=n&i=1934675&m=172ba00e46ce > Forget vote: > http://canit.ciri.com/canit/b.php?c=f&i=1934675&m=172ba00e46ce > ------------------------------------------------------ > END-ANTISPAM-VOTING-LINKS

3 3

Some more OOo 2 questions.
by Gain Paolo Mureddu 09 Mar '05

09 Mar '05

I was following the OOo 2's locale and language packs discussion, however I may lack some background here... And hence I have some questions: 1.- Are the Fedora folks involved in any way on OOo 2 development? 2.- Is there a test build for Fedora or something? Or the only way to get OOo 2 Beta is from the project's official site only? 2bis.- In the event you get the packages from openoffice.org's site, will installing them remove/overwrite OOo 1.1.3? 3.- Once OOo 2 is released, most probably Core 4 will include it, but will be also made available for previous versions of Fedora by means of the Extras repository? (this would actually be cool!) Thanks y'all!

2 1

locales in OpenOffice.org 2.0pre
by Bill Nottingham 09 Mar '05

09 Mar '05

Currently we ship the following localizations in OOo 2.0pre that don't correspond to any glibc supported locale: - eo - kn-IN - ns - tn - zu Any reason to keep them? Bill

6 9

FC2 grub defaults to oldest kernel
by Beartooth 08 Mar '05

08 Mar '05

My past experience has been that grub automatically makes each new kernel the default boot; but on my FC2 machine the default is the oldest one. Is there a reason for this? Or should I fix it? And if so, how? -- Beartooth Implacable, Linux Evangelist & Gadfly neo-redneck, curmudgeonly codger with FC1&2, YDL4 Pine 4.62, Pan 0.14.2; Privoxy 3.0.1; Opera 7.54, Firefox 1.0 Bear in mind that I have little idea what I am talking about.

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

desktop March 2005